1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato Shibby's Releases

Discussion in 'Tomato Firmware' started by shibby20, Feb 26, 2011.

  1. shibby20

    shibby20 Network Guru Member

    not fix but openssl upgrade to latest version (1.0.1g). In Rt-N and RT-AC branch i fixed also virtual ssid issue.
     
  2. kthaddock

    kthaddock Network Guru Member

    Thank you Shibby
    Testing tomorrow :)
     
  3. shibby20

    shibby20 Network Guru Member

    Question: Do you want to see Nginx+PHP in Tomato by Shibby? Shoud i merge this feature with my tomato? What do you think?
     
  4. kthaddock

    kthaddock Network Guru Member

    Yes, that would a nice function to run web server and other things.

    I have old software 110 on my RT-N16, that have OLD Access Restriction rule.
    I use that to block things for a bunch gaming kids.
    Now I want to upgrade to 117 to get heartbleed bug fixed.
    But newer builds have string module with Access Restriction rule.
    Is it possible eg switch back or can you show script to use?
    Maby a check box to choose which function to use, string or old.

    EDIT:
    When use string module in access restriction breks more function that it's provide.
    It's easyier to use string in script that use access restriction in script.
     
    Last edited: May 1, 2014
  5. shibby20

    shibby20 Network Guru Member

    Well in your opinion old 'web' module was better than current 'string'? If people agree with you I will revert it with pleasure.

    Wysłane z mojego S-line przy użyciu Tapatalka
     
  6. kthaddock

    kthaddock Network Guru Member

    :) Very nice. It's easy to use string module with iptables instead.
     
  7. szpunk

    szpunk Networkin' Nut Member

    @shibby20 , I found your new firmware lost "auto start sftp server" function in optware env. I can not connect route with sftp client, (since i have already install optware's openssh-sftp-server package) after i flashed the 116/117 firmware.

    I remember this bug happend on @Victek 's firmware (a minor/debug version) before, he fix it after i point this.

    http://www.linksysinfo.org/index.php?threads/tomato-raf-1-28-9013.63093/page-23#post-236039

    Tested 116/117 on RT-N16/N66/AC66 all have this bug.

    Can you check this?
     
    Last edited: Apr 16, 2014
  8. jerrm

    jerrm Network Guru Member

    Both have benefits, if I had to choose one or the other I'd choose the web module.

    I'd probably create a web module rule for port 80, as it was before adding the string module, add a port 443 string module rule, and add text to the page for https there must be an exact match and regex isn't applicable.

    I'm very hesitant about the dns match portion of the current rules. If there was a "block domain" option it could be valid, but has nothing to do with "http_request" as presented in the GUI.
     
  9. Mihai Olimpiu-Cristian

    Mihai Olimpiu-Cristian Serious Server Member

    Regarding web server:
    Only in AIO version, but really don't see it as a must have... who needs it could install it trough optware.
    Any option is a good option but could bring more problems than it's worth, especially in the "support" part as it's a feature only advanced users need or want.
    I would prefer bug ironing instead of that tough, I'm still bound to an old version because of them...

    String vs WEB:
    I learned to use string module, it's not as versatile but it gets the job done, you just have to rely on a long string so it won't block additional domains as jerrm said. It's main advantage is that it works also on HTTPS, and that makes it a very valuable addition nowadays. It must stay :) as more and more sites are https making old web module obsolete.
    Facebook.com is a great example!
    Playstation.net also for the console crowd ;)
     
    Last edited: Apr 17, 2014
    JoeDirte likes this.
  10. maurer

    maurer LI Guru Member

    is there a way to build shibby firmware with bcm_nat (fastnat) module for my old wl500gP - currently only K26 is built by default?
    I understood it works for K26RT and K26RT-N

    thanks
     
  11. Elfew

    Elfew Addicted to LI Member

    I dont think so
     
  12. mbreslin

    mbreslin Networkin' Nut Member

    Ever figure out an answer to this?

    Also, anyone get dnsmasq to give ipv6 addresses to mac clients? My windows machine gets its address fine, but my macbook does not. Before with radvd+rdnss all our clients including iphones received addresses/passed the ipv6 tests.

    Thanks.
     
  13. eahm

    eahm LI Guru Member

    Sorry guys I didn't follow much in the last few months, is 6x fast and stable yet (N66U)?
     
  14. szpunk

    szpunk Networkin' Nut Member

    I found it is caused by dropbear's SFTPSERVER_PATH set, in options.h:

    Code:
    /* if you want to enable running an sftp server (such as the one included with
    * OpenSSH), set the path below. If the path isn't defined, sftp will not
    * be enabled */
    #ifndef SFTPSERVER_PATH
    #define SFTPSERVER_PATH "/usr/libexec/sftp-server"
    #endif
    It will be /opt/libexec/sftp-server for optware working. @shibby20 can you fix this in next version?
     
    shibby20 likes this.
  15. maurer

    maurer LI Guru Member

    i'll reply to myself :)
    any image built with EBTABLES=y will have bcm_nat module.
    all i have to do now is test it :)
     
  16. noyp

    noyp Network Guru Member

    hi shibby,

    is it possible to add this repo http://downloads.openwrt.org/snapshots/trunk/imx6/packages/ or http://downloads.openwrt.org/snapshots/trunk/bcm53xx/packages/ on your optware script ? this is for broadcom arm cpu, but im thinking openwrt package uses opkg to install not ipkg

    did modify some variables and got errors
    Code:
    root@SipuraSPA:/opt# /tmp/mnt/data/optware-install.sh
    Checking system config ...
    Using 10.1.1.1 as default gateway.
    Using the following nameserver(s):
    nameserver 127.0.0.1
    Installing package libc_0.9.33.2-1_bcm53xx.ipk ...
    Connecting to downloads.openwrt.org (78.24.191.177:80)
    libc_0.9.33.2-1_bcm5 100% |***********************************************************************************************************|   190k  0:00:00 ETA
    tar: can't remove old file ./lib/libdl-0.9.33.2.so: Read-only file system
    Installing package opkg_9c97d5ecd795709c8584e972bfdf3aee3a5b846d-6_bcm53xx.ipk ...
    Connecting to downloads.openwrt.org (78.24.191.177:80)
    opkg_9c97d5ecd795709 100% |***********************************************************************************************************| 55994   0:00:00 ETA
    tar: can't make dir ./usr/lib/opkg: Read-only file system
    tar: can't remove old file ./bin/opkg: Read-only file system
    /tmp/mnt/data/optware-install.sh: line 92: /opt/bin/opkg: not found
    /tmp/mnt/data/optware-install.sh: line 93: /opt/bin/opkg: not found
    /tmp/mnt/data/optware-install.sh: line 94: /opt/bin/opkg: not found
    /tmp/mnt/data/optware-install.sh: line 97: can't create /opt/etc/ipkg.conf: nonexistent directory
    /tmp/mnt/data/optware-install.sh: line 98: can't create /opt/etc/ipkg.conf: nonexistent directory
    /tmp/mnt/data/optware-install.sh: line 99: /opt/bin/opkg: not found
     
    Last edited: Apr 20, 2014
  17. godraab

    godraab Networkin' Nut Member

    @shibby20

    When I setup IPv6 (6rd Relay) on my router (Asus RT-AC68U, with your build 117) i need to enter IPv6 Prefix Length: 30, as demanded by my ISP, but then I get: "ipv6_6rd_prefix_length is invalid. Please report this problem." What to do?
     
  18. Malakai

    Malakai Serious Server Member

    Just a question regarding the heartbleed bug:

    I have a RT-N16 with Tomato Shibby v116 (which has the heartbleed bug) and I will upgrade in the next days to v117. My openvpn certs were made with a ubuntu desktop that has a bad version of openssl. After upgrading tomato to v117 do I have to make new certs with a good version of openssl or the old ones are OK to use (without the bug)?
     
  19. shibby20

    shibby20 Network Guru Member

    No, you don't

    Wysłane z mojego S-line przy użyciu Tapatalka
     
    Malakai likes this.
  20. jerrm

    jerrm Network Guru Member

    The certs are fine, but if you have been running a problem version on the router with the same certs, there is the possibility the certs have been exposed.
     
    Malakai likes this.
  21. shibby20

    shibby20 Network Guru Member

    Malakai and teh_g like this.
  22. teh_g

    teh_g Networkin' Nut Member

    Yay. No need to wipe nvram or anything crazy?
     
  23. eahm

    eahm LI Guru Member

    You should always do it anyway.
     
    godraab, teh_g and koitsu like this.
  24. stcbus

    stcbus Serious Server Member

    So, I upgraded to 117 and couldn't connect over wireless. Luckily I still have the PS3 wired and had to use it's atrocious browser to get in. Turning off security for my 2.6 GHZ let me in. Still couldn't connect to 5 ghz with security. Downgraded to 116 and everything works again. What is up with 117? RT-N66U here, I did the AIO build here: http://tomato.groov.pl/download/K26RT-N/build5x-116-EN/Asus RT-N66u 64k/
     
  25. matthew_eli

    matthew_eli Serious Server Member

    Hi Shibby, where can I get the script?

    Furthermore, has the NFS server feature been dropped on ARM build?

    Thanks in advance
     
    Last edited: Apr 24, 2014
  26. noyp

    noyp Network Guru Member

    its in /usr/sbin/optware-install.sh
     
  27. zyxeu

    zyxeu Reformed Router Member

    Hi Shibby,

    Where do you have the tomato-arm branch available for RT-AC68U?

    I looked at tomato-shibby-RT-AC from http://repo.or.cz/r/tomato.git , but it does not seem to be there.

    I want to compile V118 for RT-AC68U from your sources, because minidlna1.1.2 has broken support for Samsung F series TVs.

    Thanks,
    zyxeu
     
  28. shibby20

    shibby20 Network Guru Member

    for now it`s private repository, only for tomato-arm devs. When we fixed all issues in tomato-arm then i will publish repo. You can give me patch for minidlna and i will include him to next release.
     
  29. shibby20

    shibby20 Network Guru Member

    Thread changed. Thank you roadkill :)
     
    eahm, dc361 and kthaddock like this.
  30. vraverna

    vraverna Network Newbie Member

    Anyone else have problem with dnscrypt-proxy with the newer versions?

    With older version 107, there is not much setting for dnscrypt-proxy, just a check mark to enable or disable it. dnscrypt-proxy worked fine with that version.

    I recently upgraded to newer version that have the local port and custom startup parameter settings. The default local port number is 40 but unbound can't resolve using port 40. I can get it to work with port 40 if I use the -local-address=192.168.11.1:40 (192.168.11.1 is the router internal address).

    I also tried to set local port to 53 to try to set the dnscrypt-proxy to behave like in version 107, but that disable the dnscrypt-proxy. DNS request resolved to the server without using dnscrypt-proxy.
     
  31. eahm

    eahm LI Guru Member

    Good but...

    "Tomato Shibby's Releases" doesn't make any sense BTW, "Tomato, Shibby's Releases" does.

    Why don't you make it just like the other two? "Tomato Shibby Releases".

    Shibby, every "i" you have on the TomatoAnon page MUST be capitalized, i=me=I.
     
    Last edited: Apr 29, 2014
  32. zyxeu

    zyxeu Reformed Router Member

    Hi Shibby,

    I have found the root cause for the issue and also a workaround that works for me, for details see this minidlna ticket: https://sourceforge.net/p/minidlna/bugs/237/

    The workaround for Samsung F series TVs is:
    Code:
    diff clients.c_save clients.c
    69c69
    <     FLAG_SAMSUNG | FLAG_DLNA | FLAG_NO_RESIZE | FLAG_SAMSUNG_DCM10,
    ---
    >     FLAG_SAMSUNG | FLAG_DLNA | FLAG_NO_RESIZE /* | FLAG_SAMSUNG_DCM10 */,
    
    In order to isolate the issue I have ported Justin Maggard's latest minidlna git sources from f9c37fb205933e2515100b6a71786622f5cc663b @20140428 which include many fixes, to Merlin's latest asuswrt-merlin 374.42_alpha1.

    I can send you these minidlna port sources, if you are interested.

    Thank you very much,
    zyxeu
     
    Last edited: Apr 29, 2014
  33. Darkvader

    Darkvader Serious Server Member

    Not sure if this is a bug: Dynamic DNS 1 will not clear "resolv.dnsmasq"

    When I setup OpenDNS on (Dynamic DNS 1) and later set the service to none it still went to the OpenDNS sever, I had to edit the "resolv.dnsmasq" to use my ISP DNS again.

    Tomato Firmware 1.28.0000 MIPSR2-117 K26 USB Big-VPN
     
  34. jerrm

    jerrm Network Guru Member

    @shibby20 - Whatever you decide for the GUI and rule implementation, can we at least get the 'web' module back in 119? If I had to choose 'web' or 'string', I'd choose 'web' and 'web' based gui rules, but would like to see both modules available for manual use.
     
    kthaddock and shibby20 like this.
  35. kthaddock

    kthaddock Network Guru Member

  36. shibby20

    shibby20 Network Guru Member

  37. jackyqxl

    jackyqxl Network Newbie Member

    Shibby, Great work, great news
     
  38. Bobby J

    Bobby J Reformed Router Member

    Hoping someone can help. I did some research to find a Shibby build suitable for my Linksys E3000 router. I have been using the E3000 Ext (non VPN) Build 54 version from the http://tomatousb.org/download website. It has been extremely stable. I have not had to reboot my router in more than 1.5 years. Concerned about the Heartbleed issue I started looking at more recent Shibby and Toastman builds. It appears that my version (Build 54) is too old to have the Heartbleed bug. Correct?

    If I wanted to upgrade to Shibby v117, is there an equivalent to the basic "E3000 Ext" version without the BT, VPN, Tor, add-ons? I just need a basic version that has USB support for external drivers and printers. Also, is there a compelling reason to upgrade from the version that I'm using? Looking for some helpful guidance. Thanks in advance.
     
  39. shibby20

    shibby20 Network Guru Member

    and included (but stopped) openvpn service is a problem for you??
     
  40. jerrm

    jerrm Network Guru Member

    Correct.

    There are innumerable fixes and upgrades in the newer version, but honestly, if you don't know of a solid reason to upgrade, I'd probably leave it.

    If you do upgrade, don't get hung up on the features you don't need. There are gui options to enable/disable each option and if disabled, they are not loaded at all and will do no harm. Just grab the build that seems the closest fit, configure for your needs, and and don't worry about the rest.
     
  41. mihaicris

    mihaicris Reformed Router Member

  42. iPharaon

    iPharaon Reformed Router Member

    Hi, Shibby.
    Thank you for your work.
    I bought a router Asus RT-AC68U, flashed Tomato, but got a few problems:
    1. Not working frequency 80MHz.
    2. Does not work 3G modem Huawei E3276.
    I have no other access to the Internet, so this issue is primary for me.
    Here is the log when connecting the modem to the router:
    Code:
    May  7 00:28:29 unknown kern.info kernel: usb 2-2: new high speed USB device using ehci_hcd and address 5
    May  7 00:28:29 unknown daemon.info dnsmasq[29581]: exiting on receipt of SIGTERM
    May  7 00:28:29 unknown kern.info kernel: usbcore: registered new interface driver usbserial_generic
    May  7 00:28:29 unknown kern.info kernel: usbserial: USB Serial Driver core
    May  7 00:28:29 unknown kern.info kernel: USB Serial support registered for GSM modem (1-port)
    May  7 00:28:29 unknown kern.info kernel: usbcore: registered new interface driver option
    May  7 00:28:29 unknown kern.info kernel: option: v0.7.2:USB Driver for GSM modems
    May  7 00:28:29 unknown user.debug hotplug[30331]: Attached USB device 2-2:1.1 [INTERFACE=255/2/18 PRODUCT=12d1/1506/102]
    May  7 00:28:29 unknown user.debug preinit[1]: 182: pptp peerdns disabled
    May  7 00:28:29 unknown user.debug hotplug[30338]: Attached USB device 2-2:1.2 [INTERFACE=255/2/19 PRODUCT=12d1/1506/102]
    May  7 00:28:29 unknown user.debug hotplug[30339]: Attached USB device 2-2:1.0 [INTERFACE=255/2/16 PRODUCT=12d1/1506/102]
    May  7 00:28:29 unknown kern.info kernel: USB Serial support registered for Sierra USB modem
    May  7 00:28:29 unknown kern.info kernel: usbcore: registered new interface driver sierra
    May  7 00:28:29 unknown kern.info kernel: sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
    May  7 00:28:29 unknown daemon.info dnsmasq[30346]: started, version 2.69 cachesize 1500
    May  7 00:28:29 unknown daemon.info dnsmasq[30346]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth no-DNSSEC
    May  7 00:28:29 unknown daemon.info dnsmasq[30346]: asynchronous logging enabled, queue limit is 5 messages
    May  7 00:28:29 unknown daemon.info dnsmasq-dhcp[30346]: DHCP, IP range 192.168.2.2 -- 192.168.2.51, lease time 1d
    May  7 00:28:29 unknown daemon.info dnsmasq[30346]: reading /etc/resolv.dnsmasq
    May  7 00:28:29 unknown daemon.info dnsmasq[30346]: using nameserver 192.168.1.1#53
    May  7 00:28:29 unknown daemon.info dnsmasq[30346]: read /etc/hosts - 2 addresses
    May  7 00:28:29 unknown daemon.info dnsmasq[30346]: read /etc/dnsmasq/hosts/hosts - 3 addresses
    May  7 00:28:29 unknown daemon.info dnsmasq-dhcp[30346]: read /etc/dnsmasq/dhcp/dhcp-hosts
    May  7 00:28:29 unknown daemon.notice miniupnpd[29946]: shutting down MiniUPnPd
    May  7 00:28:31 unknown user.notice root: 3G MODEM not found by cdc-acm, option or sierra module. Trying usbserial ...
    May  7 00:28:31 unknown kern.info kernel: usbcore: deregistering interface driver sierra
    May  7 00:28:31 unknown kern.info kernel: USB Serial deregistering driver Sierra USB modem
    May  7 00:28:31 unknown kern.info kernel: usbcore: deregistering interface driver option
    May  7 00:28:31 unknown kern.info kernel: USB Serial deregistering driver GSM modem (1-port)
    May  7 00:28:31 unknown kern.info kernel: usbcore: deregistering interface driver usbserial_generic
    May  7 00:28:31 unknown kern.info kernel: USB Serial deregistering driver generic
    May  7 00:28:31 unknown kern.info kernel: usbcore: deregistering interface driver usbserial
    May  7 00:28:31 unknown kern.info kernel: usbcore: deregistering interface driver cdc_acm
    May  7 00:28:31 unknown kern.info kernel: br0: port 3(eth2) entering forwarding state
    May  7 00:28:31 unknown kern.info kernel: br0: port 2(eth1) entering forwarding state
    May  7 00:28:31 unknown kern.info kernel: br0: port 1(vlan1) entering forwarding state
    May  7 00:28:32 unknown kern.err kernel: usbserial: Unknown parameter `maxSize'
    May  7 00:28:32 unknown kern.info kernel: device eth0 left promiscuous mode
    May  7 00:28:32 unknown kern.info kernel: device vlan1 left promiscuous mode
    May  7 00:28:32 unknown kern.info kernel: br0: port 1(vlan1) entering disabled state
    May  7 00:28:32 unknown kern.info kernel: device eth1 left promiscuous mode
    May  7 00:28:32 unknown kern.info kernel: br0: port 2(eth1) entering disabled state
    May  7 00:28:32 unknown kern.err kernel: usbserial: Unknown parameter `maxSize'
    May  7 00:28:32 unknown kern.info kernel: device eth2 left promiscuous mode
    May  7 00:28:32 unknown kern.info kernel: br0: port 3(eth2) entering disabled state
    May  7 00:28:32 unknown daemon.warn dnsmasq[30346]: no servers found in /etc/resolv.dnsmasq, will retry
    May  7 00:28:32 unknown kern.err kernel: usbserial: Unknown parameter `maxSize'
    May  7 00:28:32 unknown user.notice root: 3G MODEM not found ... sorry
    May  7 00:28:32 unknown user.notice root: 3G MODEM Signal Strength: -113 dBm
    
    and so the circle
    The file /dev/ttyUSB0 is not created.

    the output of dmesg:
    Code:
    usbcore: registered new interface driver cdc_acm
    usbcore: registered new interface driver usbserial
    usbcore: registered new interface driver usbserial_generic
    usbserial: USB Serial Driver core
    usbcore: registered new interface driver option
    usbcore: registered new interface driver sierra
    usbcore: deregistering interface driver sierra
    usbcore: deregistering interface driver option
    usbcore: deregistering interface driver usbserial_generic
    usbcore: deregistering interface driver usbserial
    usbcore: deregistering interface driver cdc_acm
    usbserial: Unknown parameter `maxSize'
    usbserial: Unknown parameter `maxSize'
    usbserial: Unknown parameter `maxSize'
    

    What do I do with this problem?

    RT-N66U Work fine with this modem.

    P.S. Sorry for my English.
     
    Last edited: May 6, 2014
  43. szpunk

    szpunk Networkin' Nut Member

    Flash Netgear R6300 V2 with Shibby's R7000 Firmwall

    1. You must have USB-TTL Serial Cable;
    2. Download DD-WRT init firmware for R6300 V2 and Shibby's TOMATO-ARM for R7000
    TOMATO:http://tomato.groov.pl/download/K26ARM/118/R7000/tomato-R7000-RT-AC6x--118-AIO-64K.trx
    DD-WRT:ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2014/04-18-2014-r23919/netgear-r6300v2/factory-to-dd-wrt.chk
    3.Flash DD-WRT R6300v2 firmware from netgear web GUI;
    4.Flash TOMATO-ARM R7000 firmware from DD-WRT web GUI,shutdown router after flash;
    5.Connect USB-TTL to router,run your terminal client,speed setting with 115200;
    [​IMG]

    From left to right, VCC,GND,Tx,Rx

    6. Power on router,from your terminal client, run next command:

    Code:
    nvram erase
    nvram set boardrev=0x1301
    nvram set boardtype=0x0665
    nvram set boardnum=32
    nvram commit
    7. Showdown router, use cable connect to the router's LAN2 or LAN3, set computer static IP: 192.168.1.2,open CMD box, run:
    Code:
    PING 192.168.1.1 -t
    Power on router, it will auto restart 2-3 times,when PING keep TTL=64 , open http://192.168.1.1 to access Tomato GUI;
    8. Fix VLAN:
    [​IMG]

    附固件截图:
    [​IMG]


    [​IMG]


    From:
    http://www.right.com.cn/forum/thread-141612-1-1.html @zengchen228
     
    Last edited: May 8, 2014
  44. Victek

    Victek Network Guru Member

    That's great .. so, we need only to add new vlan1ports to the code to run it. I think it might be possible to sort the bridge firmware in next ARM release. Would you give up vlan1ports map reading the CFE.bin?
     
  45. Toastman

    Toastman Super Moderator Staff Member Member

    Really nice work, guys!
     
  46. shibby20

    shibby20 Network Guru Member

    I have ready build for this router. Anyone want to test it??

    Wysłane z mojego IQ4410 przy użyciu Tapatalka
     
  47. lancethepants

    lancethepants Network Guru Member

    I was setting up my arm router and notices that 'nvram' binary in arm builds doesn't have the '
    setfile2nvram' capability. Looks like the mipsel version was actually authored by Zarate, is the one in arm just the one provided from stock then?
     
  48. szpunk

    szpunk Networkin' Nut Member

    R6300 V2 is very cheap in china(less than $100), so i buy one, @shibby20 , send me the firmware i will test it when i get the toy.
     
  49. Globespy

    Globespy Network Newbie Member

    I recently got a new Asus RT-N66U.
    Spent the entire day on phone with Asus support without any solution to horrible stuttering/buffering playback of my movie media from my Drobo5N to my WDTV Live Streaming (3rd gen). Nothing we tried resolved the problem, a problem that doesn't exist on my aging Netgear WNDR3700. Interestingly, I returned my Netgear Nighthawk for exactly the same reason.
    Anyway, I thought I'd try the latest Tomato firmware (117-EN 64K) before returning the router. Magically, it fixed the streaming issue.
    However, wireless speeds/range are horrible, even after a day of playing with every setting in advanced wireless (transmit power etc). Asus/Merlin firmware i'm seeing 35Mbps+ down and 12Mbps up. Tomato maxes out at 9Mbps down and a dismal 0.7Mbps up. I went back and forth several times between Asus/Merlin/Tomato builds to ensure it wasn't a freak incident/bad flash and each time saw the same results with each different firmware build.
    I'd appreciate any advice on a better version release, I can't imagine that all builds are seeing this kind of speed?
    I'd love to keep this router as the range is terrific on Asus/Merlin builds, but of course is broken with regards to how it interacts with the WDTV media player. If I could find a Tomato build that has better speed/range than 117-EN then I'd love to give it a try before another router goes back to Amazon.
    Thanks for any help.
     
  50. Globespy

    Globespy Network Newbie Member

    Thanks for any help.....
     
  51. Globespy

    Globespy Network Newbie Member

    A new build for RT-N66U? I'll try it for sure! If I can't find a way to get decent speed/range from a Tomato build then this router goes back just like the Nighthawk.
     
  52. ilovejedd

    ilovejedd Addicted to LI Member

    Hey Shibby! Really awesome that you've finally ported to ARM. Planning on buying the AC68. Just curious, why are there separate builds for AC68U and AC68R? I thought they just have the same hardware but R is for retail channel...
     
  53. Globespy

    Globespy Network Newbie Member

    UPDATE:

    Went back to "tomato-K26USB-1.28.RT-N5x-MIPSR2-108-AIO-64K" and all is good. I guess the 117 either ins't the best version or just not for my router!
     
  54. Globespy

    Globespy Network Newbie Member

    Can someone help me with setting bandwidth limiter settings? I've tried out the QOS but it seems to have a large hit on the overall wireless speeds (about 50% slower up and down).
    I found another thread where a guy also had the same issues (http://mybroadband.co.za/vb/showthr...m-firmware?p=10338816&viewfull=1#post10338816), but the site is in South Africa and I can't register as the registration process asks for the answer to a question (What is the surname of a famous SA politician with first name Jacob - the correct answer it Zuma, but the site won't accept that, so I can't register and ask him!!!).
    Anyhoo......I surf the web mainly, but my second biggest use is streaming large mkv movies from my Drobo5N to my WDTV Live SMP (all over Cat6 cable). I also play a bit of Xbox One games online, and download a lot. So would appreciate some help in setting up bandwidth limiter settings.
    Thanks!
     
  55. googlebot

    googlebot Network Newbie Member

    When do you support ea6500v1? it has same cpu as RT-AC66U, I can send you cfe.bin, nvram show, dmesg
     
  56. Marcel Tunks

    Marcel Tunks Networkin' Nut Member

    Start a new thread. Include router model, firmware filename used to flash, contents of Basic network settings (the wireless part) and anything you might have changed in the Advanced Wireless settings page. Then please let us know how you tested throughput and the QoS settings. Most importantly, why do you need to limit bandwidth? Is there a particular problem you are trying to solve, or just experimenting?
     
  57. Globespy

    Globespy Network Newbie Member

    Sure thing, thanks for the reply.
    Turning on QOS essentially halves my internet speeds in and out, so this is not going to work for me.
    Using the bandwidth limiter will allow a more a la carte approach to ensure that I still achieve a good QOS setup and don't lose half my bandwidth. I have no idea why putting a tick in the QOS box would do this, but I can reproduce the impacts every time I switch on/off. Something is very wrong....
     
  58. Ellsworth

    Ellsworth Reformed Router Member

    I put Shibby's 117 on a Linksys E2500 v1.0. Pretty easy compared to DD-WRT. Seems to be a very nice piece of firmware.

    However, it seems to be a little unstable for me. First it seems to be very laggy. You will connect to a web site and then it will take up to 30 seconds for the web page to display all the information. I don't remember this lag on my previous router with DD-WRT so I don't think it is my ISP causing problems. However, once the connection is established, then download speeds seem normal (possibly even a tad faster).

    Second, I have had to reset the router two different times after a week of running. The router was dead, you couldn't even log into the interface on the ethernet connection until the power was recycled. I was not able to get any info about the problem, because everything is lost when you power cycle.

    Third, I just had a problem with the wireless connection. I had a cellphone connected via WIFI and it was working normally for a few days. Then, today the WIFI connection was intermittent. The cellphone would lose connection on 2.4 GHz then connect on 5 GHz. Then it would lose connection on 5 GHz. After a few minutes, it would re-connect on 2.4 GHz. I went in on the ethernet interface, was able to reboot the router and now the WIFI connection to the cellphone is solid again.

    I had not noticed these problems reported before in this forum.
     
  59. Timka

    Timka Network Newbie Member

    Can someone help me with setting bandwidth monitor. it works perfectly fine with RTN66, but something going wrong with AC68U and 118-AIO build. real time page show the data. but no any for daily/monthly activities. i did erase NVRAM several times - no success.

    the configuration is befault. just enable the feature and change the rstats_path to /mnt/sda1/log/. the folder is accessible via ssh and contain backup file.

    following my investigation IP traffic monitor and web search neither don't save a history. attempts have no success to use RAM/NVRAM as a value for location too.

    any idea what the nest steps for troubleshooting?
     
    Last edited: May 14, 2014
  60. kthaddock

    kthaddock Network Guru Member

    That is a BETA and some function doesn't working yet, bandwith monitor is one of them.
    You have to live with that until that have been fixed.
     
    Timka and shibby20 like this.
  61. Timka

    Timka Network Newbie Member

    no choice, just to wait. any way thank you for reply...
     
  62. kthaddock

    kthaddock Network Guru Member

    You always have two choice at least.
     
    Last edited: May 14, 2014
    Python46 likes this.
  63. pena1348

    pena1348 Serious Server Member

    Good luck with that request ! (been there, done that) I think we're stuck with dd-wrt.

    P
     
  64. kthaddock

    kthaddock Network Guru Member

    I think developer have enough with router to port at this time.
    Better have a handfull with working software then have many with half working one.
     
  65. Fredrik

    Fredrik Networkin' Nut Member

    Running your tomato for R7000 now, it's working absolutely wonderfully! Using it to run open vpn, getting consistent 42mbit. Also getting a lot better wireless speed and stronger connection than stock or Kong firmware.

    Thank you so much! Got this router a few months ago just for the hope that you'd port tomato. Expect a donation towards the end of the month :)
     
    shibby20 likes this.
  66. Globespy

    Globespy Network Newbie Member

    I had same issues with 117 on my RT-N66U. Went to 108 AIO and it's rock solid - just don't use the QOS feature as it will significantly cut your bandwidth - you can change every setting to 'no limit' but it kid of defeats the point.
    Better option is to setup Bandwidth Limiter for your devices - I'm still trying to find out how to do this successfully myself!
     
  67. quinezhu

    quinezhu Addicted to LI Member

    I've flashed tomato-E2000-NVRAM60K-1.28.RT-MIPSR2-117-Max.bin into E2000. It seems that the function of "static ARP binding" doesn't work. I changed the static ip on my PC after static ARP binding, then I could still browse the internet from this PC.

    And also there is no checkbox of "Restricting unlisted devices" but only "Ignore DHCP requests from unknown devices". Are they the same one?
     
    Last edited: May 15, 2014
  68. Netwet

    Netwet Reformed Router Member

    What kind of speeds do you get? I still use kongs OLDD build, which gives by far better range than stock firmware since it allows to raise txpwr.
    With iperf I measured 180mbps on 2.4G band and 320mbps on 5G with Intel 7260AC which is only a dual stream adapter.
     
  69. Fredrik

    Fredrik Networkin' Nut Member

    I have the R7000 in another room with the kitchen inbetween. Before i could barely connect at all (tried to experiment with different settings) and got terrible speeds so in the end i set up my 3500lv2 as an access point in the living room. Now I'm just using the 5gz on the R7000 and get almost full connection and max out my Internet speed (118mbit). I'll see if I can run some tests later :)
     
  70. Malakai

    Malakai Serious Server Member

    @szpunk
    How to manually fix this until the next firmware? I have to change the SFTPSERVER_PATH in options.h? Where do I find the options.h file?
    Sorry for the (maybe obvious) question but I am not an expert in Tomato or Linux, only an (somehow) advanced user that would like to get back the access to sftp after an upgrade to v117.

    Thanks.
     
  71. szpunk

    szpunk Networkin' Nut Member

    You need compile the firmware from source by yourself, before this you can edit the options.h file in the tomato source folder.
     
  72. Victek

    Victek Network Guru Member

    well .. simply as temporary solution: ln -s /usr/libexec/sftp-server /opt/libexec/sftp-server ... if doesn't exist then create ...
     
    szpunk likes this.
  73. szpunk

    szpunk Networkin' Nut Member

    But。。no /usr/libexec folder at all...
     
  74. koitsu

    koitsu Network Guru Member

    @szpunk Yeah that'd be a problem. :) Even a bind mount (mount -o bind or mount --bind (same thing)) can't help here. I can think of some horrible way to make it work (it involves a hex editor and crossing your fingers), but it's very hackish and better to just wait for it to get fixed properly.
     
  75. shibby20

    shibby20 Network Guru Member

    Will be fixed in v119 - for rew days.

    Wysłane z mojego IQ4410 przy użyciu Tapatalka
     
    szpunk and Malakai like this.
  76. Malakai

    Malakai Serious Server Member

    Thanks for the responses... then I'll be waiting for next version.

    v119?! Shouldn't it be v118? Or maybe you are skipping a version because of the ARM being at v118?
     
  77. shibby20

    shibby20 Network Guru Member

    v118 was only for arm well next release will be v119 for mips and arm

    Wysłane z mojego IQ4410 przy użyciu Tapatalka
     
    Malakai likes this.
  78. wit100

    wit100 Networkin' Nut Member

    I had a RT-N16 that has been running Tomato for a couple of years. The other day it died. I had another RT-N16 as a backup but I found out that I couldn't transfer the backup configuration file to the replacement RT-N16, despite the fact that they were identical routers running identical version of Tomato.

    Is there any way at all that I can safely transfer my settings from one tomato router to another (assuming the same version of Tomato and identical hardware)? This would be very, very useful.

    I am now running a RT-AC66 on Shibby Tomato v117. If I get another RT-AC66 as a backup and when needed, what can I do to transfer the settings over?

    Once again, thank you, Shibby, for your great work!
     
  79. lancethepants

    lancethepants Network Guru Member

    I just copy the values to a .txt file, and copy it back after an update. My setup isn't overly complicated, but I do bunches of port-forwarding, static routes, openvpn config, ddns. ssh keys, bandwidth stats and logs.
     
  80. kzrssk

    kzrssk LI Guru Member

    Could you also download the nvram contents, cut out what you need into the clipboard and paste it all into the new one by SSH with a nvram commit at the end?
     
  81. lancethepants

    lancethepants Network Guru Member

    Yes. I would only commit fields you would regularly change in the GUI, and leave out the rest.
     
  82. gijs73

    gijs73 LI Guru Member

    Hello shibby, I love your firmware and use it since over a year now with my Asus AC66U.
    Since you didn't release an update for it long time (except the Heartbleed fix), can you tell me if you will release firmware updates in the next time for it?

    Also, my biggest feature request would be to implent DNScrypt.eu under DDNS: http://simonclausen.dk/projects/dnscrypt-winservicemgr/
    I'd be so thankful about it.
     
    occamsrazor likes this.
  83. shibby20

    shibby20 Network Guru Member

    v119 will be for all routers. It will include all changes for 118-arm and much more

    Wysłane z mojego IQ4410 przy użyciu Tapatalka
     
    kthaddock likes this.
  84. gijs73

    gijs73 LI Guru Member

    Thanks, great info!

    Will it also include the custom startup parameters? So DNScrypt would be working with other servers than just OpenDNS.
     
  85. daytimehater

    daytimehater Network Newbie Member

    which version do I use for a Linksys e900? right now im using 117. im a newbie to this stuff
     
  86. AdamH

    AdamH Network Newbie Member

    So I have always been a dd-wrt fan, but the whole heartbleed bug really had me worried :eek: since the last official update seems to be back sometime in April 2013 (v24 PreSP2 Beta Build 21061). :(

    I've heard many things about Tomato as a firmware and Shibby's release kept popping up via Google search (as well as kept being recommended). :) Flashing over my old dd-wrt with tomado went without issue and @shibby20 release seems to offer everything I could want.

    The only issue is Chromcast does not seem to like it. Keep getting the nice little error that say, Chromcast could not connect to your router check your input. Sort of frustrating. :rolleyes:

    The only issue I can tell from the firmware was I had to revert back to dd-wrt to try the different builds of Tomato. A direct upgrade would sometimes give me that error that I did not have enough space on rtm (?) (don't recall the actual 3 letters). But as I said, I can sneak my way around that by switching back to dd-wrt on then going back to tomato.

    My router is a..

    Netgear N300 Wireless Gigabit Router WNR3500U / WNR3500L

    (it does have usb if that helps any)

    Find it odd that Chromcast loves the old outdate dd-wrt though and dislikes tomato. :(
     
  87. AdamH

    AdamH Network Newbie Member

    The Chromecast issue I resolved myself. :)

    Just to point out, since I did get a friendly PM from someone... Yes, I did indeed reset both the router and chromecast back to defaults, but was still getting the error. It was not chromecast per say, but rather the app that kept giving me that message (even though my Andriod was connected online).

    I believe the setting that I changed that fixed my issue was checking the box in the basic configuration that read, "Invert Ports Order". Not exactly sure how that resolved it, but it seems to have done the trick.
     
  88. crandy2

    crandy2 LI Guru Member

    I use Chromecast every day with shibby latest aio build on Asus RT-N16. Works fine for me. Suggest you review your configuration and reboot everything

    Sent from my SAMSUNG-SGH-I747 using Tapatalk
     
  89. AdamH

    AdamH Network Newbie Member

    Nothing to review... As noted in the post above... It's fixed :)

    (even provided my solution)
     
  90. FrancoisC

    FrancoisC Network Guru Member

    On a E4200, the real time bandwidth monitor report the correct speed but not the "last 24 hours", which report much lower speed. Photo included. Running 117 AIO, tried reflashing and clearing NVRAM already.

    last2hours.png realtime.png
     
  91. FrancoisC

    FrancoisC Network Guru Member

    I switched to a smaller build (just VPN instead of AIO) and the problem went away, weird.
     
  92. Malakai

    Malakai Serious Server Member

    @shibby20

    Do you think that it is possible to get the nsupdate package in tomato firmware as I would like to update my own DNS domain (bind server) and that would be the preferred method. Or maybe just as an optware package as I don't seem to find it anywhere and I don't have the skills to compile myself a package for tomato.

    Thanks.
     
  93. Gustep

    Gustep Networkin' Nut Member

    Hi Shibby,

    Great work. I've been a fan of tomato for a while, and it seems your build is the most actively maintained one. So today I updated a regular-Tomato router to the latest Shibby build (on an Asus WL-520gu, 4MB) to use it as en ethernet bridge (WET) connecting to a WPA2 secured network. It works well!

    I also liked looking at the tomatoanon statistics. Here is a summary:

    The top 40 countries with the most Tomato-Anon users are:

    United States 5532
    China 3241
    Poland 1876
    Canada 1346
    Russian Federation 884
    Taiwan 832
    Sweden 565
    Germany 411
    United Kingdom 398
    Hungary 267
    Australia 249
    Norway 223
    Netherlands 222
    Ukraine 217
    Philippines 196
    Switzerland 183
    Italy 156
    Romania 156
    France 150
    Hong Kong 147
    Brazil 132
    Thailand 130
    Austria 126
    Slovenia 125
    Denmark 115
    Belgium 110
    Czech Republic 100
    Slovakia 85
    Spain 79
    Finland 77
    Singapore 75
    India 71
    Bulgaria 66
    New Zealand 62
    Latvia 48
    Malaysia 46
    Israel 45
    Portugal 40
    Indonesia 39
    Mexico 38

    Furthermore, what is the most popular router model? The top 10 routers are:

    2427 Asus RT-N66U
    1770 Asus RT-N16
    740 Netgear WNR3500L v2
    711 Asus RT-N53
    562 Netgear WNR3500L/U/v2
    481 Asus RT-AC66U
    473 Linksys E4200 v1
    435 Linksys E1000 v2.0
    363 Linksys WRT54G/GS/GL
    361 Linksys E2500 v1.0

    Which router is most popular in which country?

    USA
    1589 Asus RT-N66U
    844 Asus RT-N16
    361 Linksys E2500 v1.0
    315 Asus RT-AC66U
    278 Netgear WNR3500L v2
    244 Linksys E3000
    243 Linksys WRT54G/GS/GL
    219 Linksys E4200 v1

    China
    435 Linksys E1000 v2.0
    391 Asus RT-N53
    287 ZTE ZXV10 H618B
    204 Linksys E900 v1.0
    152 Belkin Play N600 (F7D4302/F7D8302) v1
    151 Vivick Q-W601
    148 Asus RT-AC68R/U
    129 Linksys E4200 v1

    Poland
    410 Netgear WNR3500L/U/v2
    320 Asus RT-N53
    272 Linksys WRT610N v2
    244 Ovislink WL1600GL
    151 Asus RT-N12
    143 Asus WL-500gP
    36 Tenda W1800R
    34 Asus WL-500W

    Canada
    351 Asus RT-N66U
    215 Asus RT-N16
    90 Asus RT-N12 B1
    87 Asus RT-AC66U
    73 Linksys WRT54G/GS/GL
    67 Linksys E3200 v1.0
    63 Linksys E4200 v1
    58 Netgear WNR3500L v2

    Russia
    245 Asus RT-N16
    158 Asus RT-N66U
    86 Netgear WNR3500L/U/v2
    85 Netgear WNR3500L v2
    42 Asus RT-N12 B1
    38 Asus RT-N10U
    28 Linksys E4200 v1
    23 Asus WL-500gP v2

    Taiwan
    388 Asus RT-N16
    178 Asus RT-N12 B1
    94 Asus RT-N66U
    30 Asus RT-N10U
    19 Asus RT-AC66U
    18 Asus RT-N15U
    12 Asus RT-N12
    11 Netgear WNR3500L v2

    Sweden
    255 Netgear WNR3500L v2
    127 Asus RT-N66U
    38 Netgear WNR3500L/U/v2
    37 Asus RT-N16
    31 Asus RT-AC66U
    22 Linksys E3200 v1.0
    12 Linksys WRT54G/GS/GL
    11 Linksys E4200 v1

    Germany
    108 Asus RT-N66U
    53 Netgear WNR3500L v2
    41 Asus RT-N16
    37 Linksys E3200 v1.0
    35 Linksys WRT54G/GS/GL
    29 Asus RT-AC66U
    28 Netgear WNR3500L/U/v2
    23 Linksys E4200 v1



    Very interesting! Thanks again.
     
    TyShawn and shibby20 like this.
  94. Elfew

    Elfew Addicted to LI Member

    Any info? :)
     
  95. kthaddock

    kthaddock Network Guru Member

    When it's done!
     
  96. Edrikk

    Edrikk Network Guru Member

    I'm personally also curious as to what issues were worked on / fixed in the ARM (more specifically R7000) builds.. I hope maybe a post by @shibby20 to speak to that would be great...

    I know it was mentioned that the release was close, so a little log would be great....

    On a separate note, Shibby, are you keeping your code in a different git now, or are you only committing right at the end to the http://repo.or.cz/w/tomato.git ? I (personally) never ask such a question because I generally read the git, but there haven't been updates there in a long while...
     
  97. shibby20

    shibby20 Network Guru Member

    v119 should be release tomorrow.

    Mipsel sources i will update after release. ARM sources are in private repository for now.

    Wysłane z mojego IQ4410 przy użyciu Tapatalka
     
  98. Elfew

    Elfew Addicted to LI Member

    Thanks for info. Keep good work!
     
    eahm likes this.
  99. saivert

    saivert Reformed Router Member

    Any place where one can discuss building from source? I seem to have run into some issues when building on Ubuntu 13.10. Seems like the toolchain in shibby branch is built for x86_64 host while the one for Toastman is for i686.
    I checked out the old building guides on tomatousb site but they are out of date.
    I would love to help documenting the build process better.
     
  100. MtTime

    MtTime Connected Client Member

    Came across the shibby builds last week when researching an Asus RT-AC66U. I've since flashed five Linksys WRT54xx units and the Asus. Awesome product!! Keep up the awesome development work!! :)

    I believe I just discovered an issue after upgrading a Linksys WRT54GL from Tomato v1.28 to Shibby v117 build.

    I have the primary router with WiFi disabled - this serves the LAN 192.168.16.1. A secondary router was flashed to shibby v117 build. Connection goes from Primary LAN port to secondary WAN port. The secondary has a static WAN IP of 192.168.16.221. The LAN IP is 192.168.1.1. In Admin > Admin Access, the local access = HTTPS, 443. Remote access is enabled = HTTPS, 8080 and allow wireless access is enabled. We have a port forward rule that routes traffic on port 8080 to internal address 192.168.1.1.

    When using Tomato v1.28, I'm able to access the secondary router across the LAN by browsing to 192.168.16.221:8080. However, after flashing to shibby v117 build, I am denied access or better stated the site cannot be resolved. I've tried in Firefox and Chrome. I flashed back to Tomato v1.28 and I can access across the LAN again.

    If I plug directly into a LAN port and browse to 192.168.1.1, I can reach the GUI.

    What am I missing here? Is this a bug or do I need to configure something else to access shibby v117 across the LAN?
     

Share This Page