1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato Toastman's Releases

Discussion in 'Tomato Firmware' started by Toastman, Dec 18, 2011.

  1. Toastman

    Toastman Super Moderator Staff Member Member

    I can't reproduce the garbage in status-overview here. All my RT-N16's read correctly.

    Cumu - Don't know what might have happened, wait for more reports. Possibly not waiting long enough after flash?
     
  2. Cumulonimbus

    Cumulonimbus Networkin' Nut Member

    I wait 5 Minutes after Flash was done, on both Routers. Now, i have two semi-bricked routers :) Dawn.... :-(
     
  3. LanceMoreland

    LanceMoreland Network Guru Member

    I am getting it on my E4200's also.

    One looks like this: Linksys E4200 v1 !
    and the other like this: Linksys E4200 v1 _id_gen
     
  4. stefanct

    stefanct Serious Server Member

    without looking at the code and the actual data (in nvram i presume) it is hard to tell, but it certainly looks like a missing string termination, hence the print method continues to read beyond the model name until it finds a \0 (e.g. after the next string).

    edit: ok. seems like it is much simpler :)
    Code:
    export --set | grep t_model_name
    
    shows:
    Code:
    nvram set t_model_name="Linksys E3000 \x18"
    
    so a simple call of
    Code:
    nvram set t_model_name="bla"
    will fix the minor cosmetic issue.

    toastman: any idea how that could end up in nvram like that? i am 100% sure that it happened although i have enabled the erase nvram option on flashing.
     
  5. kthaddock

    kthaddock Network Guru Member

    Okey, NVRAM resett and try agin......... ;) ( Maby I don't remember to do that this time)
     
  6. Kevin Darbyshire-Bryant

    Kevin Darbyshire-Bryant Networkin' Nut Member

    Any chance of a Netgear WNR3500lv2 build - the one that produces a .chk file unlike everything else (oddball router!) :)
     
  7. kthaddock

    kthaddock Network Guru Member

    Okey I have now testing load build Nvram erase tested back and forward and it's still there. 0498.1 Working as it should.
    Toastman did you tested with 0499-VLAN-nocat (11juni) build? Seems be when reading this from ram: "Broadcom BCM4716 chip rev 1 pkg 10" but get "mq1 parent 1: classid 1:1 htb rate %skbit"

    kthaddock
     
  8. the_bhagwan

    the_bhagwan Network Guru Member

    All seems good here, Thanks Toastman!!
    Tomato Firmware v1.28.7499 MIPSR2Toastman-VLAN-RT K26 USB Ext
    Model Belkin Share Max N300 (F7D3301/F7D7301) v1
    Chipset Broadcom BCM4716 chip rev 1 pkg 10
     
  9. Toastman

    Toastman Super Moderator Staff Member Member

    It's the RT-N builds... I have manage to reproduce it now.
     
  10. kthaddock

    kthaddock Network Guru Member

    Okey :D
    Thanks !
     
  11. Cumulonimbus

    Cumulonimbus Networkin' Nut Member

    Hi im am the man with the two briked E4200. :)

    If i start the Router with Power On, i can ping it at 192.168.1.1 and for few seconds i can do a tftp -i 192.168.1.1 PUT R:\tomato-E4200-NVRAM60K-1.28.0499MIPSR2Toastman-RT-N-Std.bin successfull.

    After this, the Router doesn't flash new Firmware and don't reboot. Any Ideas? (Jtag recovery needed?).
     
  12. Toastman

    Toastman Super Moderator Staff Member Member

    I've started upload of RT Std now ... but still BETA status..
     
  13. Vitaliy69

    Vitaliy69 Serious Server Member

    What needed to check to remove the beta status? I have Linksys E3000.
     
  14. pharma

    pharma Network Guru Member

    Will likely always be Beta ... will always contain new development features & fixes. Some updates you will not need since it will not affect how you are currently using your router.
     
  15. Paul Yeung

    Paul Yeung Serious Server Member

    Grateful to know if the PPTP VPN server bug (No DNS response with DNS server set to 0.0.0.0 / router IP) is fixed in this build?
     
  16. tvlz

    tvlz Addicted to LI Member

    Will you try this modified build, I have an idea what is wrong hopefully this will fix it.
     
  17. kthaddock

    kthaddock Network Guru Member

    Shouldn't be any explain text on "Bandwidth Limiter - QOS"

    Code:
     
    - IP Address / IP Range
    - Example: 192.168.1.5 for one IP.
    - Example: 192.168.1.4-7 for IP 192.168.1.4 to 192.168.1.7
    - Example: 4-7 for IP Range .4 to .7
    - The IP Range devices will share the Bandwidth
    - MAC Address Example: 00:2E:3C:6A:22:D8
    
     
  18. Toastman

    Toastman Super Moderator Staff Member Member

    kt - yes, that's true - I forgot to edit that!

    Guys, I remove the word BETA when I am happy it doesn't have a major problem. But being BETA doesn't mean it DOES necessarily have one either. Remember, there has NEVER been a router firmware that has been completely free of bugs, including every manufacturer's OEM firmware!

    Please be careful with this build.
     
    Jacques likes this.
  19. LanceMoreland

    LanceMoreland Network Guru Member

  20. cchhat01

    cchhat01 Serious Server Member

  21. Cumulonimbus

    Cumulonimbus Networkin' Nut Member

    Ok, another man with this Issue. Is there a German Guy who can Debrick my three E4200v1? I will spend to Helpers lot of Money.
     
  22. Riddlah

    Riddlah Networkin' Nut Member

    hey toastman,

    thanks for the updated firmware to fix the vlan issue. only thing that is still present is the text after the model of the router. http://i46.tinypic.com/vg07qb.jpg not a deal-breaker but just a heads up
     
  23. gfunkdave

    gfunkdave LI Guru Member

    Where did 7498.1 VLAN version go? It's not showing up on the 4shared site.
     
  24. Toastman

    Toastman Super Moderator Staff Member Member

    June 14 2012 - 1.28.7499.1 and variants

    bugfix build

    - fixed some builds
    - added help text on BWLimit page
    - remove garbage on overview page (I hope!)


    WARNING - DHCP IS DISABLED BY DEFAULT. DON'T FORGET
    TO TURN IT ON IF YOU NEED IT.
     
    Vitaliy69 and kthaddock like this.
  25. kthaddock

    kthaddock Network Guru Member

    @Toastman
    You are the man....... :rolleyes:
    THANK YOU !!!
     
  26. Toastman

    Toastman Super Moderator Staff Member Member

    Now, I have no ideas on the bricking of the 4200's - many people have downloaded that version but no real adverse feedback. So do we have an issue or not?

    Anyone?
     
  27. dc361

    dc361 LI Guru Member

    Is there a trailed build for the initial flash of the E900?
     
  28. braindedd

    braindedd Networkin' Nut Member

    Tiny builds are still approx. 20kb too big ... :-/
     
  29. Cumulonimbus

    Cumulonimbus Networkin' Nut Member

    Has anyone here (livinng in Germany) who have debricked successfull a E4200? The E4200 has a small 12 Pin Header with only 1mm Pitch. Full size of Jumper is only 6mm in brightness. To small for Standard JTAG-Cable and 12 Pin Header(2.54mm Pitch). I need help to debrick 3x E4200. Anyone there can borrow my his Jtag-Cable?
     
  30. Cumulonimbus

    Cumulonimbus Networkin' Nut Member

    ATTENTION - We have a FIRMWARE ISSUE.

    I have debricked my Semi-brickes E4200 with this Description i found on TomatoUSB-Site
    http://tomatousb.org/forum/t-303285

    After i tftp the orginal Firmware to the E4200, Router is debricked right now and full working,

    I can Upgrade successfull to:
    tomato-E4200-NVRAM60K-1.28.0498.1MIPSR2-Toastman-RT-N-Std.bin successfull,

    but not to:
    tomato-E4200-NVRAM60K-1.28.0499.1MIPSR2Toastman-RT-N-Std.bin

    On my booth debrickes E4200v1.0 (EU-Version) i have reproduced this two Times!

    The Last Running Version i testet and that are full working is:
    tomato-E4200-NVRAM60K-1.28.0498.1MIPSR2-Toastman-RT-N-Std.bin

    I don't know whats going wrong, but we have really a Firmware-Issue!
     
  31. kthaddock

    kthaddock Network Guru Member

    No I'm not sure about that. Have you done NVRAM erase before and after you have upgrade ?
    Most problem comes from restdata from earlier builds.
     
  32. Cumulonimbus

    Cumulonimbus Networkin' Nut Member

    Yes, 100% sure 30-30-30 Reset before and after upgrade from 489.1 to 499.1, and 30-30-30 before and after upgrade from Linkysys-Firmware to 499.1
     
  33. kthaddock

    kthaddock Network Guru Member

    30-30-30 isn't the same as NVRAM erase. Try that and se if it's solve your problem.
     
  34. vincent

    vincent Networkin' Nut Member

    Hi, I'm reporting a bug in when using the Asus RT66.

    When adding DHCP MAC --> IP addresses, when the LAST entry is a dual MAC entry (wireless and wired), the 498.1 build refuses to confirm the FIRST MAC in that last entry as valid. I have the box checked to ignore anything but registered MACs. If I use the 2nd MAC (wired) it works fine...and yes I have verifed about 100 times that the wireless MAC entry (which is first) is also listed in the permitted wireless clients. To recreate, I just put its MAC back into the dual entry item and it refuses to give me the IP. If I remove the FIRST MAC in the last entry and make it a single MAC --> IP item, which is now last in the list, , I am given the assigned IP correctly.

    I struggled with this for a couple hours last night until I realized it seems to be tied to the DHCP list item being a dual entry and last in that DHCP--> MAC --> IP listing. Please let me know if you need more details. thanks.
     
  35. Cumulonimbus

    Cumulonimbus Networkin' Nut Member

    Before i upgrate to 0499 from Linksys-Firmware, i do

    a) Restore Firmware defaults
    b) 30-30-30 Reset

    But i have a new Information:

    tomato-E4200USB-NVRAM60K-1.28.0499.1MIPSR2Toastman-RT-N-Ext.bin is working fine
    tomato-E4200-NVRAM60K-1.28.0499.1MIPSR2Toastman-RT-N-Std.bin are not working

    Yes, before every upgrade i make Step a and b
     
  36. pharma

    pharma Network Guru Member

    Upgraded to tomato-E4200USB-NVRAM60K-1.28.0499.1MIPSR2Toastman-RT-N-VPN. No issues to report.
     
  37. LanceMoreland

    LanceMoreland Network Guru Member

    Same here.
     
  38. TomatoE2000

    TomatoE2000 Networkin' Nut Member

    i have an issue to report in latest vpn build(v1.28.7499.1). it is probably an issue with other builds too.
    i have a setup where the gateway is not same as my tomato e2000. am using the DHCP server from e2000. (am using it as a switch with internet connection from cablemodem/router combo).
    the setting "Use user-entered gateway if WAN is disabled" when checked used to take care of it. (when my WAN is disabled and gateway is entered in Basic->Network).
    with the latest build, it broke and the gateway provided to clients is always same as e2000 LAN address.

    potential causes:
    1. when Dnsmasq was upgraded in the last version, it probably broke the code that writes into dnsmasq.conf.

    workaround/solution:
    1. dnsmasq custom configuration (advanced->dhcp/dns) with
    dhcp-option=3,192.168.X.X where 192.168.X.X is the gateway Ip address
     
  39. Lorenceo

    Lorenceo Networkin' Nut Member

    Could we please get an NVRAM value to set the IPv6 MTU?
    It currently seems to ignore the MTU set for the WAN and defaults to 1500. (Which breaks v6 on PPPoE with an MTU of 1492).

    Something along the lines of nvram set ipv6_mtu=X, for use with ipv6 via DHCP with prefix delegation.
    I can't for the life of me get radvd to run properly with a custom config. Tomato starts it with its default config, even when I edit that config.
    Using v1.28.7499.1 VLAN.

    Thanks.
     
  40. BikeHelmet

    BikeHelmet Networkin' Nut Member

    Solved with 7499.1 (tomato-K26USB-1.28.7499.1MIPSR2Toastman-VLAN-RT-VPN-NOCAT.trx)

    Bandwidth monitor works again, reboot time is down to 35 seconds, and I haven't tested multiple SSIDs yet. (Probably still broken. I've never gotten them to work under any firmware...)
     
  41. Dr Strangelove

    Dr Strangelove Networkin' Nut Member

    Upgraded to Tomato Firmware v1.28.0499 MIPSR2Toastman-VLAN-RT-N K26 USB VPN on my Linksys E4200v1
    No issues at this time. All good.
     
  42. aries

    aries Network Guru Member

    Can someone tell me what build is for e3200? Does it support 5Ghz band?
     
  43. Edrikk

    Edrikk Network Guru Member

    Hi Toastman,

    I see you reverted your fix for garbage in model name, which is a good thing. It's not the model name that's the problem, but rather the version (as you kinda noticed based on your initial 'fix' and the revert). But you can't just remove the 'ver' from the sprintf (and leave the %s behind) as that will clobber memory (and at best is a bandaid).

    The fix is actually as follows:

    At top of function

    Code:
    static int init_nvram(void)
    in file init.c, you'll see the 'ver' is never initialized.

    Add a line:
    Code:
    ver = NULL;
    after the line
    Code:
    name = NULL;
    and it'll be fixed.

    Do keep up the great work!


    PS. Not sure if a restore to defaults will be needed (in case garbage has been written to NVRAM prior to this)...


    PPS. I noticed that variable was added as part of the "Support New E-Series Routers" commit..
    http://repo.or.cz/w/tomato.git/commitdiff/85faaaac9f5e9fcc37b43f87525287811324f1a7
     
  44. Edrikk

    Edrikk Network Guru Member

    PS. Any chance of updating the K24 builds? ;) :)
     
  45. Toastman

    Toastman Super Moderator Staff Member Member

    June 15 2012- 1.28.7500 and variants


    (Presently only RT builds - RT-N will follow soon)

    * Incorporated new updates from TEAMAN - refer to his notes for directions

    EXPERIMENTAL VLAN/VID mapping GUI - allows using full range/4k 802.11Q tagging on some models.

    IPTraffic:
    • change NVRAM defaults to 'disabled'
    • check/validate minimum size of LAN/subnets only when cstats is enabled
    • Fix JS error causing initial load delay when default nvram 'tomato' skin (Moc-RT-N)
    MultiSSID:
    • check/warn about any BSSID/MAC address discrepancies on WL VIFs (Advanced: Virtual Wireless, advanced-wlanvifs.asp)
    • fix WL MAC filter to include all WL VIFs (Basic: Wireless Filter, basic-wfilter.asp)
    • WPAx fixes - skip WPAx/nas restart (can cause problems with WAN as Wireless Client)
    PPTPD:
    • fix/config dnsmasq to answer DNS queries on pppX interfaces
    • fix PPTP when used over WAN setup using PPPoE
    • allow specify 'custom' config/settings on webUI
    Firewall: allow DMZ-style forwarding to any LAN bridges (no longer restricted to primary LAN)

    VLAN-GUI: include E4200v1 (VLAN 802.1q support confirmed by users

    rc: syslogd custom path improvements (tries to preserve messages at syslogd restart, recreate only if it's a symlink/custom path)


    WARNING - DHCP IS DISABLED BY DEFAULT.
    DON'T FORGET TO TURN IT ON IF YOU NEED IT.
     
    jm77 likes this.
  46. Pioneer

    Pioneer LI Guru Member

    DHCP enabled by default? - nice! ;)
     
  47. bagu

    bagu Network Guru Member

    So where do you read that DHCP is enable by default ?
     
  48. Pioneer

    Pioneer LI Guru Member

    Nowhere. But on my e2000 it's enabled even after an NVRAM reset.

    Moreover "Country / Region" is set to UNITED STATES (think the default was Singapore before... ok, no big deal) and IP Traffic Monitoring is disabled by default.
     
  49. jsmiddleton4

    jsmiddleton4 Network Guru Member

    I have to hit refresh once at 4share to get files to show up.
     
  50. teh_g

    teh_g Networkin' Nut Member

    Do any of your builds contain the OpenVPN stuff built in? I want to have all my router traffic sent to a VPN. Makes it a little easier for security on my network.
     
  51. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Had to refresh wired clients to update their DNS information with xx50....
     
  52. Kevin Darbyshire-Bryant

    Kevin Darbyshire-Bryant Networkin' Nut Member

    Dear Mr Toastman - Many thanks for the .499.1 Netgear WNR3500Lv2 build - it's loaded & running. All okay so far - more testing to be done, but it's so good to have the fully flexible inbound QOS rules back again :)
     
  53. LanceMoreland

    LanceMoreland Network Guru Member

    Yes, Just look for VPN in the file name.
     
  54. Toastman

    Toastman Super Moderator Staff Member Member

    June 17 2012- 1.28.0499.3

    - fixed makefile
    - initialise ver, init.c
    - remove garbage on overview page (2)

    This release is to check new models etc. are working OK before adding
    Teaman's latest updates into RT-N branch.


    WARNING - DHCP IS DISABLED BY DEFAULT.
    DON'T FORGET TO TURN IT ON IF YOU NEED IT.
     
  55. LanceMoreland

    LanceMoreland Network Guru Member

    Toastman, Getting this on the overview page: "Linksys E4200 v1 v(null)" with "tomato-E4200USB-NVRAM60K-1.28.0499.3MIPSR2Toastman-RT-N-VPN" Also getting the same thing with: "tomato-E4200USB-NVRAM60K-1.28.0499.3MIPSR2Toastman-RT-N-Ext" on a remote access point.
     
  56. Toastman

    Toastman Super Moderator Staff Member Member

    oh .... LOL
     
  57. BobR

    BobR Serious Server Member

    Hello Mr. Toastman,
    I've been using your firmware for several months now with my E3000 and am very happy with it. With the first 499 release, though, I noticed an anomaly on bootup. Dnsmasq exits on receipt of sigterm and is then restarted. This has remained through 499.1 and now 499.3. The exact version I'm using is
    tomato-E3000USB-NVRAM60K-1.28.0499.3MIPSR2Toastman-RT-N-Ext.bin.
    Any ideas?
     
  58. gfunkdave

    gfunkdave LI Guru Member

    Minor bug that has been in all VPN builds for the last several months:

    Giving the command nvram export --set | grep vpn_ to export VPN config does not export the certificates. It results in each certificate nvram variable being exported as an unterminated string:

    nvram set vpn_client1_crt="-----BEGIN CERTIFICATE-----

    Edit: Actually, this occurs when exporting any nvram variable that is input in a multi-line text box on the web.
     
  59. jm77

    jm77 Serious Server Member

    Thanks for your work on this - put this on my WRT160Nv3 and it's working like a charm!

    (tomato-K26-1.28.7500MIPSR2Toastman-RT-Std)
     
  60. Vitaliy69

    Vitaliy69 Serious Server Member

    What var type of "ver"? Have not time to download source code. May be should to fix:
    Code:
    ver = "";
     
  61. braindedd

    braindedd Networkin' Nut Member

    Any progress on making the Tiny build smaller?
     
  62. Aeron

    Aeron Serious Server Member

    Hi, mr Toastman,

    I have a little question about my E4200 and your USB 499.3 RT-N-VPN latest (at the moment) firmware: is there 5GHz support or no? I saw on different forums some confirms (people talk, you know) that your firmware already have this support, but when I setup my router to use 5GHz on eth2 it just disappears from available WiFi networks list and I can’t reach it anyhow. I erased nvram a few times and tried Shibbys firmware but 5GHz still doesn’t work.
     
  63. Toastman

    Toastman Super Moderator Staff Member Member

    I don't have an E4200, maybe someone else will post. It should work ...
     
  64. Edrikk

    Edrikk Network Guru Member

    I don't think the problem is so much the fact that it should be set to "" (although that will also 'fix' the display, but is inconsistent with other const char * initializations such as 'name').

    Currently shibby has coded the display to be shown as follows:
    Code:
     
            if (name) {
                    nvram_set("t_fix1", name);
                  if (strcmp(nvram_safe_get("boot_hw_ver"), "") != 0) {
                          sprintf(s, "%s %s %s", mfr, name, ver);
                  } else {
                          sprintf(s, "%s %s", mfr, name);
            }
            else {
                    snprintf(s, sizeof(s), "%s %d/%s/%s/%s/%s", mfr, check_hw_type(),
    

    The 'issue' is that the display is string comparing boot_hw_ver against "" for some reason (which is why I mentioned above as you say initializing to "" will also fix the display). But to be consistent with the other variables, I would change that code to be (for correctness, easier reading, and consistency):

    Code:
            if (name) {
                    nvram_set("t_fix1", name);
                  /* Don't show the version information if it's empty (null or empty string) */
                  if (ver == NULL || strcmp(ver, "") == 0) {
                          sprintf(s, "%s %s", mfr, name);
                  } else {
                          sprintf(s, "%s %s %s", mfr, name, ver);
            }
            else {
                    snprintf(s, sizeof(s), "%s %d/%s/%s/%s/%s", mfr, check_hw_type(),
    



    Edit: A quick check to validate the above is good... I'm not sure if nvram_safe_get replaces NULL with something or not...
     
    Vitaliy69 likes this.
  65. Dr Strangelove

    Dr Strangelove Networkin' Nut Member

    5GHz on Linksys E4200v1 works fine for me on USB 499.3. I am using VLAN and VPN version.

    Check that the 5GHz channels you are using are available on the client. Some cards don't support the lower channels in the 5GHz frequency.
     
  66. WildFireSG

    WildFireSG Serious Server Member

    I also have a Linksys E4200v1 with working 5GHz. I'm currently running "v1.28.0498 MIPSR2-Toastman-VLAN-RT-N K26 USB VPN-NOCAT". It's got a few bugs, but I'm waiting for Toastman to release .0500 with all the updates and fixes from Teaman before I upgrade. Looks like it will resolve most if not all of the bugs I experience.
     
  67. Solace

    Solace Networkin' Nut Member

    For the webfilter would it be possible to get a more sophisticated filter when browsing the logged data?

    ex. Next Page button, IP filter/DNS filter to skim through results. Also is there any way to dump the data to USB like the BW/IP monitors.

    Also out of curiosity what benefits does having the BT client at the router provide other then a few security benefits?
     
  68. WildFireSG

    WildFireSG Serious Server Member

    A couple benefits come to mind. 1) You don't have to leave your computer on to download torrents (if you turn off your computer for some reason...I run mine 24/7), and 2) The torrents will download to a USB harddrive attached to the router and can be instantly accessible from all computers on the network.
     
  69. fenhuan

    fenhuan Serious Server Member

    Check your country code in advanced country settings. Most probably this is due to incorrect country selected, because in some countries it is not allowed, you know. Ensure setting for both channels.
     
  70. Toastman

    Toastman Super Moderator Staff Member Member

    June 20 2012 - 1.28.0499.4

    - makefile, some builds smaller
    - remove garbage on overview page (3)

    This release is to check new models etc. are working OK before adding
    Teaman's latest updates into RT-N branch.


    WARNING - DHCP IS DISABLED BY DEFAULT.
    DON'T FORGET TO TURN IT ON IF YOU NEED IT.
     
  71. lissny

    lissny Networkin' Nut Member

    can some one plz add quota management system.. data is already collected ..it is to restrict to network or speed
     
  72. n66666611

    n66666611 Serious Server Member

    Hi, sorry to post a problem for my first post but :

    When downloading with Jdownloader, only 4 downloads wich is quite a litle, my RT-N16 CPU shows nearly 50% use!
    Do you think its "normal"?

    I am using the latest version that I know : v1.28.0499 MIPSR2Toastman-RT-N K26 USB VPN-NOCAT
     
  73. s3phy

    s3phy Serious Server Member

    Hi! First post here, just discovered this firmware a few hours ago.

    I was running Tomato-USB on my WNR3500 v2, but it lacks IPv6, and since my ISP recently enabled IPv6, I want to use it.

    I grabbed the tomato-K26-1.28.7500MIPSR2Toastman-RT-MiniIPv6.trx firmware... which is a few kBytes too big for my router's 4MB MTD :( So I tried tomato-K26-1.28.7500MIPSR2Toastman-RT-Mini.trx, which... bricked my router :D
    Hopefully I have a USB<>TTL adapter on hand, I repaired the router, and tried to flash again the same firmware (I thought it may have been a bad flash)... bricked again.

    So I tried the -Tiny versions and... well everything has been fine for the last 15/20 minutes.

    Any hope of having an IPv6 enabled version for my router?

    Many thanks for this firmware anyways!! ;)
     
  74. The Doctor

    The Doctor LI Guru Member

    n66666611, CPU usage seems to be more related to transfer speed than number of connections. On my RT-N16 (v1.28.7493 MIPSR2-Toastman-RT K26 USB VPN-NOCAT), I run around ~50% when uploading at my connections 35mb/s limit. How fast are you downloading? Using QOS or any other extra services?

    Ed
     
  75. n66666611

    n66666611 Serious Server Member

    @The Doctor : my connection max speed is arround 15Mb/s. I m not using QOS. I have just Enable Udpxy ON , USB ON, media server ON but I see this relativly high CPU load only when downloading.
     
  76. Toastman

    Toastman Super Moderator Staff Member Member

    n6 .... it's perfectly normal ... don't worry about it.

    All the network routing is done in software, so your router is extremely busy servicing Ethernet interfaces interrupts. There is not much we can do about it.
     
  77. n66666611

    n66666611 Serious Server Member

    oki thanks.
     
  78. Aeron

    Aeron Serious Server Member

    I suppose you’re correct about lower channels. I have MacBook Pro 13" Mid ’09 and my Wi-Fi section in System Information says that supported channels are following: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165. Tomato from mr Toastman provides only 36–48 channels for 5GHz. But 5GHz was working fine with stock and mirwifi.org firmwares, how it can be possible?
     
  79. pharma

    pharma Network Guru Member

    The channels you see depends on whether you choose lower or higher control band and also depends on what "Country" you chose in Advanced Wireless. For instance, if you chose "United States Minor Outlying Islands" you will have access to all the channels you list.
     
  80. Aeron

    Aeron Serious Server Member

    Thank you, it really helped.
     
  81. wappy

    wappy Serious Server Member

    Any news on the 5Ghz driver for e3200?
     
  82. kisenberg

    kisenberg LI Guru Member

    Is there a way in v1.28.7500 MIPSR2 at IPv6 Port Forwarding to shorten the prefix of a destination-address? If IPv6-Prefix changes, the destination must be modified. I would prefer to only enter the host-address as destination.
     
  83. mvsgeek

    mvsgeek Addicted to LI Member

    Feature request (apologies if this has been addressed in the past) - would it be possible to add a "name" field to the WDS link list on the basic setup page? This would allow WDS links to be identified by name rather than MAC address.
     
  84. thepoch

    thepoch Serious Server Member

    Updated to the latest 7500.2 (specifically: tomato-K26-1.28.7500.2MIPSR2Toastman-RT-MiniIPv6.trx [for Asus RT-N12] and tomato-K26USB-1.28.7500.2MIPSR2Toastman-RT-VPN.trx [for Asus RT-N16]). Noticed that the MiniIPv6's SSH won't start. Nothing in the Logs about it. Erased all NVRAM and restored settings via nvram --set (as I always do). SSH works on the N16.

    Is it just me? Other than that, stable as always.
     
  85. Toastman

    Toastman Super Moderator Staff Member Member

    June 25 2012 - 1.28.7500.2 and variants

    - Fix overidden mac address not being saved (tnx to jyavenard)
    - big code cleanup (tnx to jyavenard)
    - make some builds smaller
    - some small fixes


    * Incorporates new updates from TEAMAN - refer to his notes for directions

    EXPERIMENTAL VLAN/VID mapping GUI - allows using full range/4k 802.11Q tagging on some models.

    IPTraffic:
    • change NVRAM defaults to 'disabled'
    • check/validate minimum size of LAN/subnets only when cstats is enabled
    • Fix JS error causing initial load delay when default nvram 'tomato' skin (Moc-RT-N)
    MultiSSID:
    • check/warn about any BSSID/MAC address discrepancies on WL VIFs (Advanced: Virtual Wireless, advanced-wlanvifs.asp)
    • fix WL MAC filter to include all WL VIFs (Basic: Wireless Filter, basic-wfilter.asp)
    • WPAx fixes - skip WPAx/nas restart (can cause problems with WAN as Wireless Client)
    PPTPD:
    • fix/config dnsmasq to answer DNS queries on pppX interfaces
    • allow specify 'custom' config/settings on webUI
    Firewall: allow DMZ-style forwarding to any LAN bridges (no longer restricted to primary LAN)

    VLAN-GUI: include E4200v1 (VLAN 802.1q support confirmed by users

    rc: syslogd custom path improvements (tries to preserve messages at syslogd restart, recreate only if it's a symlink/custom path)

    WARNING - DHCP IS DISABLED BY DEFAULT.
    DON'T FORGET TO TURN IT ON IF YOU NEED IT.
     
  86. Toastman

    Toastman Super Moderator Staff Member Member

    thepoch - I'm not at home at present to confirm but I believe I removed SSH from that build at the request of several people.
     
  87. thepoch

    thepoch Serious Server Member

    Toastman - No worries. Was just wondering why it wouldn't start since it was still in the GUI. I guess the build + SSH fits the RT-N12 but doesn't for a lot of other people's routers? Thanks for the update on this!
     
  88. Toastman

    Toastman Super Moderator Staff Member Member

    Thanks! I'll check that, because if it *was* removed, it shouldn't be in the GUI ;)
     
  89. shadowken

    shadowken Networkin' Nut Member

    @ Toastman
    Have you made any changes to Captive portal yet ?
    e.g. enable the captive portal on certain interface something that ! :confused:
    I really would like to use the captive portal but not on the main interface ...
     
  90. godraab

    godraab Networkin' Nut Member

    So now that I have upgraded my RT-N66U to 64k nvram, can I install this version of Toastman?

    [​IMG]tomato-K26USB-NVRAM60K-1.28.0500.2MIPSR2Toastman-VLAN-RT-N-VPN-NOCAT[​IMG]
    [​IMG]
    [​IMG]
     
  91. kthaddock

    kthaddock Network Guru Member

    Hi
    If I wore you I DON'T. I'm not sure ASUS have fixed theirs CFE with 60/64k nvram support. I shoul'd wait so you don't have a brick.

    kthaddock
     
  92. jyavenard

    jyavenard Network Guru Member

  93. kthaddock

    kthaddock Network Guru Member

    So there is full support on 64k nvram in ASUS RT-N66U, CFE update or sofware ?
    kthaddock
     
  94. dd10986

    dd10986 Serious Server Member

    Is there a fw version with vlan gui for the e2000 (converted wrt320n)?
    (meanwhile, 'search button') I found that there's a few versions for this router with vlan gui support.
    Any suggestions on which is most reliable?
     
  95. jyavenard

    jyavenard Network Guru Member

    The firmware I've linked to add supports to 64k nvram for the RT-N66U (it won't work with other router). There's no need to update the CFE with this.

    You can also go back to a 32kB nvram firmware with no problem...
    The build I've added is a r2nc (MIPS Release 2 NC build (standard plus VPN, extras and NOCAT)
     
  96. Dr Strangelove

    Dr Strangelove Networkin' Nut Member

    [Edited original comment]

    Thought I had a 5GHz WiFi problem with fw, but it may just be my laptop.
    I reverted back fw and my laptop still has a problem so I'll will work on it and get it sorted.
     
  97. Toastman

    Toastman Super Moderator Staff Member Member

    June 27 2012 - 1.28.0500.3

    - Update RT-N wireless driver to 5.100.138.20 (thanks to shibby & jyavenard)

    This build contains a new wireless driver build from ASUS sources, it may or may not provide better performance! I've uploaded all builds as usual, please post your findings for others.

    Please regard these builds as experimental ....


    WARNING - DHCP IS DISABLED BY DEFAULT.
    DON'T FORGET TO TURN IT ON IF YOU NEED IT.
     
  98. wappy

    wappy Serious Server Member

    Toastman, is this driver also working for the 5Ghz chip on the e3200?
     
  99. Toastman

    Toastman Super Moderator Staff Member Member

    EDITED

    It is a dual band simultaneous driver, but the E3200, E2500 & Asus rt-n53 have 5Ghz USB radios, so a different drivers and code("usbap" in asus & linksys source code) need to be added for 5Ghz support.
     
  100. wappy

    wappy Serious Server Member

    I will give it a try, an report it here.
     

Share This Page