Tomato USB Print Server Not Working

Discussion in 'Tomato Firmware' started by 00_ren, Jan 27, 2013.

  1. 00_ren

    00_ren Networkin' Nut Member

    Hey Guys,
    I cannot print to my HP Laserjet Printer connected to my RT-N16 router running shibby tomatoUSB build 105

    I see it as an attached device after enabling USB support 1.1 and rebooting my router (screenshots below).

    [​IMG]

    [​IMG]
    I verified the router is listening on 9100 and configured my printer TCP/IP port settings to print to this to port but no dice.

    I check the log and found no errors in regards to printing. Any help would be appreciated. Thanks.
     
  2. 00_ren

    00_ren Networkin' Nut Member

    I fixed my issue by enabling IGMProxy and UDProxy on my firewall. N.B LAN1 is my guest wireless adapter so i didn't enable IGMProxy on that adapter.

    [​IMG]
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice