1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tomato VLAN

Discussion in 'Tomato Firmware' started by CypherBit, Aug 7, 2008.

  1. CypherBit

    CypherBit Network Guru Member

    I'd like to have two VLANs on my WRT54 v2 running tomato 1.19 (can upgrade if needed).

    One VLAN would be for ports 1-3 and WLAN that should function like it does right now. That is DHCP 192.168.1.x/24 which has access to the internet.
    The second VLAN should apply to port 4 only and would give it an IP of 192.168.2.x/24, but that would limit it only to the LAN, I don't need internet on this port.

    I've read some tutorials for DD WRT, but were unable to follow them. I know the GUI of Tomato doesn't support VLANs, but would appreciate a step-by-step how this could be done with startup scripts or any other method.
     

Share This Page