1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

TomatoVPN Bridged VPN Client Can't see other Client

Discussion in 'Tomato Firmware' started by matt9099, Jan 13, 2011.

  1. matt9099

    matt9099 Addicted to LI Member

    I am new to OpenVPN but I have managed to set up a Bridged network over OpenVPN. I am having trouble accessing all parts of the VPN after adding a second Client to the VPN.

    I just added a second client to the Server. To be clear I have a TomatoVPN Client1 and TomatoVPN Client2 connected to a TomatoVPN Server. Client1 can see all devices connected to Server but cannot access anything on Client2 network. Client2 Can access anything on Server but not Client1 network. Server can access both Client1 and Client2. (Client1---->Server<----Client2). All Three networks are on I have assigned all known devices static IPs so the local router will handle "local" internet traffic.

    What do I need to do access Client2 network form Client1 and Client1 network from client2?
  2. Engineer

    Engineer Network Guru Member

    Do you have "Allow Client<->Client" checked under Advanced on VPN tunneling menu?

    Don't know if that will help but worth a shot, from what I just read about it.

  3. matt9099

    matt9099 Addicted to LI Member

    VPN Clients can now access each other

    Thank you Engineer,

    That seems to have done the trick. I wouldn't have thought to click the advanced tab. I just need to work on the throughput now. Seems kind of low.

Share This Page