1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

tricky rv080 vpn routing problem

Discussion in 'Networking Issues' started by bcbogger, Dec 10, 2006.

  1. bcbogger

    bcbogger LI Guru Member

    I have 2 rv080's with a vpn tunnel between them, RV#1 is on an internal 10.2.X.X/16 address, RV#2 is on 10.10.1.X/24. I want to port forward from RV#1 through the tunnel to a computer behind RV#2 Is this possible?

    I am not stuck on the network address for RV#2 could be changed, but RV#1 needs to stay
  2. Toxic

    Toxic Administrator Staff Member

    you should be able to port forward this yes, you can also use Firewall, "advanced routing" from one IP to another IP (VPN to VPN) so that particular protocol is always used across the VPN tunnel i guess
  3. bcbogger

    bcbogger LI Guru Member

    ive tried to port forward, however it only lets me enter the last octet of the address. because network a is 10.2.1.x and network b is 10.10.1.x it wont let me do this. Perhaps i can use the telnet interface, but i have no idea what parameter port forwards are saved as.

    i also looked for the advanced tab under firewall, but i could see nothing there..


Share This Page