1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Trouble with using mixed drives

Discussion in 'Cisco/Linksys Network Storage Devices' started by csrusso, Jan 3, 2006.

  1. csrusso

    csrusso Guest

    I have been using the NSLU2 with no trouble with one
    EXT3 drive under 2.3R29 for over a year.

    After upgrading to 2.3R63 and connecting one
    NTFS drive to USB1 and my old EXT3 to USB2
    the network connection to the NSLU2 drops
    for some reason within 72 hours and the drives
    inaccessible. After rebooting the NSLU2, everything
    works again for another 72 hours, but this
    is very unreliable for unattended backups.
    Any thoughts or suggestions? Thank you.
     
  2. AtillaThePun

    AtillaThePun Network Guru Member

    You can schedule when the NSLU2 reboots on the Admin page. First make sure there's nothing there and it's all set to Never. Then if it is all set to Never you just need to schedule your reboot around your backup.
     

Share This Page