1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Trying to Rez a WRT54G - v3.0

Discussion in 'Cisco/Linksys Wireless Routers' started by reese1222, Aug 27, 2005.

  1. reese1222

    reese1222 Network Guru Member

    I opened it up located the flash chip, shorted out 15 and 16, and can sucessfully ping it. But when i try to tftp the firmware to it, it says Timed Out. Anyone have a suggestion. Im using
    "tftp -i 192.168.1.1 put code.bin"

    Knowing that sometimes the ports are reversed ive tried the imput port and output ports.
     
  2. whittinghamj

    whittinghamj Network Guru Member

    your trying to put code.bin via tftp, the only firmware i know that uses code.bin for a file name as default is the TinyPEAP firmware, are you trying to install tinypeap? if not what firmware are you trying to upload? and what version router do you have? I know you say V3 but have you checked the serial numbers to confirm this fact?

    cheers

    ps I had the same problem a few days ago so I can help out once I get some more info. also are you trying to upload tftp via LAN or wireless connections?

    cheers

    Jamie
     
  3. reese1222

    reese1222 Network Guru Member

    ok the model is a WRT54G v.3 and it matched up to the autopsy of the v.3, thought i dont know the difference to the v.3.1. The S/n is CDF80E271274 if that helps. Also i renamed the WRT54GV4.0_4.20.6_US_code.bin to just code.bin. I used wired to tftp.
     
  4. reese1222

    reese1222 Network Guru Member

    hell yes. dont worry about it. i have mastered the router and have sucessfully flashed it with the new firmware. just put it back together and set it up back up in my network. thanks for your help though. Have a nice weekend.
     

Share This Page