1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Tunnel Connects - but can't access shares

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by soslink, Jun 5, 2007.

  1. soslink

    soslink LI Guru Member

    Using (2) RV042 routers with 1.3.8.1 firmware. The tunnel connects between:

    Local Group: (Head Office)

    Gateway Type: IP Only
    IP Add: Static from ISP
    Sec Grp: Subnet
    IP Add: 10.10.10.0
    Subnet: 255.255.255.0

    Remote Group Setup:

    Type: IP Only
    IP Add: Static from ISP
    Remote Sec Grp: Subnet
    IP Add: 192.168.16.0
    Subnet: 255.255.255.0

    The Local Group is configured with a Server that has (2) NICs:

    Internal NIC:
    IP: 10.10.10.150
    SN:255.255.255.0
    GW:empty
    DNS1:10.10.10.150

    EXT NIC:

    IP 192.168.16.1
    SN: 255.255.255.0
    GW: 192.168.16.254 (this is the LAN IP of the RV042 at head office)
    DNS: 10.10.10.150

    The remote group uses DHCP on peer-to-peer network.

    IS it going to be possible to access the shares at the head office with this multi-homed setup?

    Thanks
     
  2. TazUk

    TazUk Network Guru Member

    I'm a bit confussed, why has the server got two NIC's each within the LAN range of both ends of the tunnel :confused:
     

Share This Page