1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Unable to connect to network using WAG54G

Discussion in 'Other Linksys Equipment' started by dogo, Jul 17, 2005.

  1. dogo

    dogo Guest

    As title really I'm using a WAG54G V.2 with Firmware Version: 1.00.19, when tring to connect to the network, I can see my network but unable to connect, any ideas as to what might be wrong..

    Ive have tried using the firmware upgrade
    WAG54GV2-U_AnnexA_ETSI_v1.01.00_000_code.bin but that ends up with and error..


    Cheers for any help..

    dogo
     
  2. Ofloo

    Ofloo Network Guru Member

    to what can't u connect .. ???
    to internet provider to your router ? wired wireless.. it really depends ex:

    first config you beter do that wired, cause the option allow admin over wireless might be disabled ..

    isp.. well that could be a matter of vpi vci settings try auto mode..

    and so forth, wireless could be a matter of wrong encrytion key

    router key 4 -> client key 1, in case of WEP of course .. also a matter you should share .. do you use encrytion at all when wireless if so disable it all add your mac and see if it works..

    or not having enabled wireless at all, .. try to be more specific also include some errors..
     
  3. ReDFlaG

    ReDFlaG Network Guru Member

    MAC filtering?
     

Share This Page