1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Unplugging Power caused Config Reset

Discussion in 'Tomato Firmware' started by fareal, Oct 17, 2006.

  1. fareal

    fareal LI Guru Member

    Not sure if this is a hardware issue or tomato issue or just my issue.

    I have a WRT54G v.3

    I was moving around some equipment and unplugged the power to the router around 3 times rather quickly (maybe 5 to 10 seconds between). Soon after I was wondering why my computer couldn't find the wireless network. I look at the available networks and looks like the WRT54G is back to the default SSID of "linksys". Logged into the router and its back to all of its default settings.

    I'm running Tomato Version 0.07.0812
     
  2. njeske

    njeske Network Guru Member

    i done a bunch of power cycles on both my routers running tomato and they've always come back up with the same config. i've never done it in quick succession though.
     
  3. katsyonak

    katsyonak Network Guru Member

    Happened to me once with my WRT54G v3.1 running Thibor, so I guess it's not firmware related and is caused by the hardware.
     

Share This Page