1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

updating tomato firmware

Discussion in 'Tomato Firmware' started by vetdoc, Nov 9, 2008.

  1. vetdoc

    vetdoc Addicted to LI Member

    Hi
    I have a question regarding updating my tomato version 1.14 on myWrt54gl liksys router. I have been using this version for a few years now with no real probems, but I see there have been many firmware version updates since then. If I decide to update do I just have to download the most recent firmware version into a file, and then open tomato and go to admin-update and browse to find the file and click update.? If this is correct will the new firmware update change any of my security settings or Wep passwords? Im a real novice at this stuff so if these questions seem trite bare with me. I assume that updating to the newer firmware will be beneficial as far as my intermet experience, particularly my download and upload speeds and voice enabled chats.

    Thanks
     
  2. Partizan

    Partizan Network Guru Member

    Yes, that's the way to do it, and all your settings should remain. It's good to clear NVRam before flashing the new version.
     
  3. jockel

    jockel LI Guru Member

    Hi,
    But if you clear NVRAM, the settings re gone? No?
     
  4. agentsky1919

    agentsky1919 LI Guru Member

    If you clear the NVRAM the setting will be erase and the default configuration of the router will replace it.
     
  5. mito

    mito LI Guru Member

    Yes, if you clear the nvram all setting are gone as well if you press the small back button.
     
  6. vetdoc

    vetdoc Addicted to LI Member

    Thanks Guys Ill be updating to version 1.21 this weekend,hopefully this version is as stable as 1.14 ha been.
     

Share This Page