1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Upgrade for Linksys WRT54G?

Discussion in 'HyperWRT Firmware' started by Rudi1, Jan 16, 2005.

  1. Rudi1

    Rudi1 Network Guru Member

    Hi!

    First I like to thanx for this great firmware!I'am Newbie on this stuff and I must ask this before I upgrade this new firmware.
    What is the correct way to upgrade this firmware and then if something not work well go back with lower firmware?What options I must set in router?

    Thanx!
     
  2. Morpheus

    Morpheus Network Guru Member

    Before upgrading the firmware do a hard reset for 30/60 seconds on the WRT54G, then reboot the router install the firmware hard reset again and away you go.

    Do not upgrade the firmware over the wireless only via a cat5 to the pc
     
  3. Rudi1

    Rudi1 Network Guru Member

    sorry for my ignorance,but if I understant correct:

    hard reset-press reset button for about 30/60s
    not upgrade wireless-connect router to PC with cable,but which line from router?

    also,when this is finish,how I can go back with firmware if something not work correct?
    :oops:
     
  4. Morpheus

    Morpheus Network Guru Member

    Any from 1-4, on the LAN. And I always remove the cable from the WAN Port before I do a Firmware flash. If you want to go back to other Firmware Just follow the previous instructions with the other Firmware.
     
  5. Morpheus

    Morpheus Network Guru Member

  6. xblitz920x

    xblitz920x Guest

    How do I install the firmware??

    I am cluless on how to get the firmware from my desktop to the router?!?
     
  7. Morpheus

    Morpheus Network Guru Member

    Re: How do I install the firmware??

    http://tinyurl.com/4ol62
     

Share This Page