1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Upgrade from openwrt

Discussion in 'Tomato Firmware' started by jmntn2000, Oct 3, 2006.

  1. jmntn2000

    jmntn2000 Network Guru Member

    Has anyone upgraded from openwrt? How did you do it? Should I flash back to linksys first or just flas from openwrt?

    Also, how do you resent the nvram vars? Is there a way to do it after flashing to tomato?
     
  2. NateHoy

    NateHoy Network Guru Member

    You should be able to just upgrade, but I don't know how many people have tried it from OpenWRT. A straight install SHOULD work fine, though...

    To reset NVRAM after the flash to Tomato, log into the GUI and go to "Administration" / "Configuration". Then select the appropriate option from the "Restore Default Configuration" pulldown, and click "OK".
     
  3. bokh

    bokh Network Guru Member

    About 2 weeks ago I flashed from Tomato to Linksys 4.30.7 to OpenWRT and to Tomato back again (some testing because of the switch-ports in my WRT: they behave like snails when wired...).
    The only thing I did in between the flash-upgrades, was holding the reset-button on the back for app. 15 seconds.
     
  4. jmntn2000

    jmntn2000 Network Guru Member

    I don't understand? What is the difference between an strait install and under the openwrt web upgrade tab browsing and uploading the tomato image? How do I do a strait install? ftp?
     
  5. NateHoy

    NateHoy Network Guru Member

    By "Straight install", I meant just a plain, basic install using the GUI. Use the web upgrade in OpenWRT.
     

Share This Page