Upgrading Firmware on a WRT54GS v2.0?

Discussion in 'DD-WRT Firmware' started by lrtrees, Feb 7, 2006.

  1. lrtrees

    lrtrees Network Guru Member

    I would like to put the newest firmware version on my router. It is a GS v2.0 (CGN3). DO I have to use the mini .bin file first on this router or just the standard.bin file? And I am also woundering, can I put the Linksys firmware back on the router at a later date if I choose to?

    Thanks,
    Lon
     
  2. __spc__

    __spc__ Network Guru Member

    On my WRT54G v1 & v2 routers, I used the generic standard BIN file from the router's f/w upgrade web interface.

    The mini is only necessary I believe for v4 routers.
     
  3. callous

    callous Network Guru Member

    To be safe, use the mini_wrt54gs first, then usethe DDWRT.

    I have on 2 WRT54GSv2.0 reflashed straight from DDRWT to Linksys orig. 4.70 without issues, and done that as well on a v3.0 without problems.

    Remember to wait 5 minutes when you see the Continue button after flashing before doing anything else.
     
  4. lrtrees

    lrtrees Network Guru Member

    Cool, thanks for the info guy's. Just what I was looking for!

    Lon
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice