use wan port as reg lan port - wrt54gsv2 v23

Discussion in 'General Discussion' started by iburnbud2, Mar 10, 2006.

  1. iburnbud2

    iburnbud2 Guest

    hi, noob here trying to use the wan internet port on a wrt54gsv2 using .23 dd-wrt


    ive followed all the examples i could find and none seem to work.
    i have a feeling something isint set properly.

    heres some output that i think is misconfigured? or maybe some settings in the webconfig of dd-wrt need to be set/not set to have the wlan port work just as 5th switch port.

    # nvram show | grep vlan
    vlan0ports=0 1 2 3 4 5*
    port5vlans=0 16
    port3vlans=0
    port1vlans=0
    lan_ifnames=eth2 eth3 vlan0 eth1
    wan_ifnames=vlan1
    vlan1hwname=et0
    vlan1ports=5
    size: 21294 bytes (11474 left)
    port4vlans=0
    vlans=1
    wan_iface=vlan1
    port2vlans=0
    port0vlans=0
    wan_ifname=vlan1
    vlan0hwname=et0

    -- thats after i use:

    nvram set vlan0ports="0 1 2 3 4 5*"
    nvram set vlan1ports=5
    nvram commit
    reboot

    -- and have had the vlan webconfig set all 5 check on top(vlan0) and also to last 4 on top and 1st on second row(vlan1) with it set also to lan.


    seems easy enough. any tips please?

    dd-wrt is raw! thank you

    peace



    edit--i think maybe i should have posted in the dd-wrt firmware area. my apologies.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice