1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Using Remote Desktop between 2 networks

Discussion in 'Networking Issues' started by DEADI, Mar 5, 2006.

  1. DEADI

    DEADI Network Guru Member

    Here's my setup. Wireless modem ==> wireless router(1) ==> access point ==> wireless router(2).

    Router #1 has two computers one wireless and another wired. The signal is then sent 2500 feet to an access point which is wired into router #2. Router #2 then feeds both wired and wireless computers.

    I don't want router #1 handing out address at location #2. Router #1 addy is 192.168.1.1 Router #2 is 192.168.10.1.

    What changes do I need to make to share files and use remote desktop between the computers on the 2 routers.

    Routers are WRT54G and access point is WAP54G. Running hyperwrt and hyperwap firmware.
     

Share This Page