1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Using WAP 2000 as bridge with WRT54G

Discussion in 'Networking Issues' started by Scorp-D, Mar 18, 2008.

  1. Scorp-D

    Scorp-D Guest

    Hey..

    I got a WRT54G vers. 7, and a WAP 2000 and wanted to make a bridge, but I can’t get I working.
    This is my current configuration:

    PC:
    IP: 192.168.1.10
    Subnet mask: 255.255.255.0
    Gateway : 192.168.1.254 or 192.168.1.1
    DNS: 192.168.1.254 or 192.168.1.1

    WRT54G:
    IP: 192.168.1.1
    Subnet mask: 255.255.255.0
    SSID: NetworkName
    Wireless channel: 1, 2.412 GHz
    Wireless Security – Security mode: WPA – Personal
    Encryption: AES
    Shared Secret: Password

    WAP 2000:
    IP: 192.168.1.254
    Subnet mask: 255.255.255.0
    Gateway : 192.168.1.1
    DNS: 192.168.1.1
    Basic Wireless settings – SSID 1: NetworkName
    Wireless channel: 1, 2.412 GHz
    Wireless Security – Security mode: WPA – Personal
    Encryption: AES
    Shared Secret: Password
    AP Mode – Wireless bridge: Enabled, MAC is the same as the WRT54G’s Wireless MAC.

    I have updated both WRT54G & WAP 2000 to the newest version.
    I can’t ping the router or anything on the internet, only the WAP 2000 from the PC.

    Scorp-D
     

Share This Page