1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Using WRT54GS only as OpenVPN Server

Discussion in 'Tomato Firmware' started by kamatschka, May 9, 2010.

  1. kamatschka

    kamatschka Network Guru Member

    Hello there.

    I got my new WNDR3700 and hooked it up. Its working really well but one thing I miss on the Router: Its OpenVPN. So I connected my WRT54GS through Lan to the WNDR3700.
    I can connect to the TomatoWebUI. So I am using DynDNS for resolving the WanIP. that works flawelessly if the WRT54GS is directly connected to the Modem and itself is obtaining the WAN IP Adress from the Provider.

    Now the WNDR3700 is directly hooked up to the Modem and not the WRT54GS anymore. I configured Tomatos WAN-Type to "DIsabled" and configured DynDNS from "Use WAN IP" to "Use external IP adress checker (every 10 minutes)" . Tomato doesent get any external IP and so I cannot use the WRT54GS as an OpenVPN Server with the DynDNS adress.

    Can someone help me out?

    Thank you in advance.

    kama
     

Share This Page