1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

v23 issue on my wrt54gs v2

Discussion in 'DD-WRT Firmware' started by istudio, Jan 27, 2006.

  1. istudio

    istudio Guest

    hi there,

    i got my wrt54gs flashed from v22.final2 to v23 std edition about 2 weeks ago. i have noticed that my dhcp is not functioning all the time (i.e. usually windows xp can't communicate with dhcp server on wrt54gs resulting "limited connectivity"). second is, the mac filter sometimes work and sometimes doesnt work. (i.e. "work" means, i have added those mac address in the list and selected permit only, save + reboot, but still sometimes have to power cycle it to get it recogonize and allow lised mac adapter to connect)

    any clues?
  2. eshapurov

    eshapurov Network Guru Member

    I have similar problem with MAC Filter : after a working day, suddenly my laptop did not connect to the router. Re-saving the MAC Filter setting solve the problem. I have no idea why this happened.
    I use DD-WRT v23 standard on WRT54GL.
  3. XeviouS

    XeviouS Network Guru Member

    Ensure that your "Routing and Remote Access" service is started and not disabled on your Wireless XP machines.
  4. gotamd

    gotamd Network Guru Member

    I've had the same problem. I was wondering whether it was my computers or the router, but now I'm beginning to think it's the router. After I set up static IP's for the computers they work fine.

Share This Page