1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

v23 SP2 and port forwarding

Discussion in 'DD-WRT Firmware' started by Alexey, Dec 7, 2006.

  1. Alexey

    Alexey LI Guru Member

    Good day, everyone.

    Just upgraded my WRT54GS to v23 SP2 from original firmware.

    Main question is port forwarding, of course.
    I installed web server on the network, and routed port 80 to the inside ip 192.168.0.1:80 (static one) via port range forward.
    When I try to access web server from internet, it's unavailable, but in the router log I see incoming packets which are "accepted" from the external ip, from which I am trying.

    On a pc, via tcpdump I do not see any attempts to access web server from the router.
    So, it seemes, like router accepts connections, but does not route packets to internal network.

    Please advice, can ot be monitored and fixed somehow else?

    P.S. Provider is not filtering any ports for sure.
     
  2. HiSpeed

    HiSpeed Network Guru Member

    Hi,

    You have to forward to the IP address of the PC server !
    192.168.0.1 is probably your WRT not your PC !?
     
  3. Alexey

    Alexey LI Guru Member

    No, my router is 192.168.0.50.
     

Share This Page