1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

V23beta2 14.11.2005 brickted my wrt54g v2.2

Discussion in 'DD-WRT Firmware' started by knight14th, Nov 14, 2005.

  1. knight14th

    knight14th Network Guru Member

    Yes... This is the first time my router is bricked after flashing V23b2 14.11.2005. Now I'm trying to revitalize my router using tftp... it stil seems to work... so keep your finger crossed.
  2. vinz

    vinz Network Guru Member

    No problem with my two WRT54G v2.2 and the v14.11.2005
  3. knight14th

    knight14th Network Guru Member

    I can flash it using tftp but after that the router still does not answer:

    # tftp -v -m binary -c put dd-wrt.v23_mini_wrt54g.bin
    mode set to octet
    Connected to (, port 69
    putting dd-wrt.v23_mini_wrt54g.bin to [octet]
    Sent 2520064 bytes in 21.4 seconds [942311 bit/s]

    What now?
  4. LAGMonkey

    LAGMonkey Network Guru Member

    return back to the official linksys firmware (using their TFTP flash program) and then work your way back to v23 after flashing to v22r2.

    Also remember to turn your NIC to half duplex 10meg and flash using IE (i know its wrong but it does help).
  5. knight14th

    knight14th Network Guru Member

    It is still alive!
    So what I had to do:

    Downloading v23b2 14.11.2005 mini (<3MB)
    Running tftp:
    sleep 10; tftp -v -m binary -c put firmware.bin
    Put reset button and unplugged power supply.
    And its up again... puh.. I've losted my wind. :)

    Oh and I'm using Linux and did not had to speed down my nic.
  6. JaLooNz

    JaLooNz Network Guru Member

    My v2.2 runs fine on the 14.11.05 firmware. Though I got a bit of trouble at first, pressing the Save button just gives me a blank page.

    Reflashed to Linksys original and to the mini again before it works.

Share This Page