1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Victek's mod based on x.23 is available...

Discussion in 'Tomato Firmware' started by jsmiddleton4, Nov 20, 2008.

Thread Status:
Not open for further replies.
  1. leftstrat

    leftstrat Addicted to LI Member

    This is the first non Linksys firmware I've ever used Victec, and I am very impressed. Thanks for putting out such #$@ kicking firmware. :)
     
  2. GhaladReam

    GhaladReam Network Guru Member

    Vic,

    Would you recommend an NVRAM erase & re-key settings between 1.23.8515 ND and 1.25.8515 ND or can it just upgrade directly and keep the settings?
     
  3. Victek

    Victek Network Guru Member

    Sorry to be your nightmare, erase nvram please, it's the only way I know is ok if something arises. I copy most of my settings to gedit or text editor...

    ******************************************************
    TRX Image:
    Total Size .... : 3235840 (3160.00K)
    Images ...... : 3233088
    Padding ..... : 2752
    CRC-32 ........ : C6DA48D6
    128K Blocks ... : 25
    Offsets:
    0: 0x0000001C
    1: 0x000A8540
    2: 0x00000000

    -----------------
    1.25.8515 RAF ND ready
    -----------------
    ***************************************************

    The test version is ready in http://victek.is-a-geek.com/tomato.html .. in Test Version section
     
  4. Dashiell

    Dashiell Network Guru Member

    Running really well on Buffalo WHR-HP-G54, wireless performance fantastic. Vic, I assume this test version can be flashed on other models as well.... WRT54-TM for instance?

    PS - Any chance of a changelog?
     
  5. Victek

    Victek Network Guru Member

    Yes, I run in WRT-54GL, so, no problem for TM

    Changelog:
    _ DNSMasq 2.49
    _ Busybox 1.14.2
    _ Passive mode for Wireless Survey
    _ Regulatory mode for wireless
    _ Wireless Auto channel by default
    _ TCP_Conntrack up to 8192 connection
    _ Allow multiple MAC address per device
    _ SSH remote forwarding allowed
    _ More precise match for l7 ftp pattern
    _ Miniupnpd updated to ver. 20090605
    _ Wan_is_a_LAN feature included when WAN is disabled
    _ All the features of Official Tomato 1.25
    _ All the features of Tomato RAF
    _ ND version with wireless driver 4.158.4.0
    _ 140 IP/MAC in restriction table
    _ 140 IP/MAC limit in IP/MAC limiter
    _ ... and a lot of testing hours by 12 people before release .. :) , Thanks for facilitate me the access to check the logfiles.

    The source code is available in the same page, Source code section.

    Thanks.
     
  6. CBR900

    CBR900 LI Guru Member

    10x alot for the great work.

    Are you going to include the USB support?
     
  7. Victek

    Victek Network Guru Member

    Not for a while, IP/MAC traffic and nocat are the next job in the inbox .. I did a good clean of waste in the 1.25 RAF, so, I expect this version will fly as a hell surfing...
     
  8. gulag

    gulag Addicted to LI Member

    Asus WL520Gu works fine. WRT54GL v1.1 works fine.wireless performance really fantastic.

    _______________________
    Tomato RAF 1.25.8515.5 ND
     
  9. Larix

    Larix LI Guru Member

    Is there a test version for a WRT54G v2.2 which wl0_corerev is 7?
     
  10. Victek

    Victek Network Guru Member

    Larix, you can install this release in your router too, core>9 is the right one but also some people said that from core=>7 was ok for the ND version, try it, will be a good feedback for other people looking this thread.
     
  11. thor2002ro

    thor2002ro Addicted to LI Member

    uuuuuuuuuuuuuuuuuuuu excited ...... i can continue my mod ... :)
    1 question.... did u succeed on any of your sd plans , any of them implemented?
     
  12. Victek

    Victek Network Guru Member

    thor2002ro, no, SD is your beer :), I go for nocat and IP traffic, be careful with fs drivers I didn't apply most of the patches cause I don't need them. You have a very clean version for your mod.

    Please, in order to trace the new release, please post your comments in this new thread already created by one of the newcomers to the forum; http://www.linksysinfo.org/forums/showthread.php?t=62248

    I hope the Boss will block the thread for Tomato 1.23, we have a new release. Enjoy.

    Thanks. :biggrin:
     
  13. der_Kief

    der_Kief Super Moderator Staff Member Member

    Done
     
Thread Status:
Not open for further replies.

Share This Page