1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Victek's mod based on x.23 is available...

Discussion in 'Tomato Firmware' started by jsmiddleton4, Nov 20, 2008.

Thread Status:
Not open for further replies.
  1. CBR900

    CBR900 LI Guru Member

    here is what I did:
    1- attached my usb reader (with 4.0GB mmc card memory)

    2- enabled [Core USB Support+USB 2.0 Support+USB Storage Support+Ext2 / Ext3 File System Support+FAT File System Support+Automount]

    what to put in [Run after mounting]?
    what to put in [Run before unmounting]?

    3- enabled FTP Server

    already formated my mmc card with linux (not sure if formate is ok).
    Can I formate it with fat filesystem via windows?

    please help me to access my mmc memory card
     
  2. Victek

    Victek Network Guru Member

    CBR900, no, I just integrated Teddy_Bear mod, don't ask me for the job done by other colleagues, read their post.
     
  3. Victek

    Victek Network Guru Member

  4. QSxx

    QSxx LI Guru Member

    I did, obviously didn't type the right thing in... Sorry again for bothering you. ThX... :D
     
  5. larc

    larc Addicted to LI Member

    I'm a total newbie. I want to install this Mod so I can limit bandwidth fairly or restrict on someone downloading all the time. Does this just allow you set upload/download by entering value in KB? like 50kb/sec, etc?

    What exactly do we have to reconfigure again when we reset the NVRAM? Do we have to reenter the WEP key and such?

    I can just upgrade from any computer via the network web?

    What's the difference between the Tomato RAF 1.23.8025.7z format and Tomato RAF 1.23.8505ND.7z format.? Besides Normal and New Drivers?

    I'm using WRT54GL and Tomato 1.21
     
  6. Victek

    Victek Network Guru Member

    Cheers :)
     
  7. larc

    larc Addicted to LI Member

    Still not exactly sure what ND is, but I just flashed to the original.

    Good thing I took a screenshot of my settings... I thought I would be screwed.

    What would happen if I didn't reset the NVRAM? Would there really be conflicts?

    I can't wait to test out the bandwidth limiter. :tongue:
     
  8. Victek

    Victek Network Guru Member

    victek@T3l3m4:~# telnet 192.168.1.1
    Trying 192.168.1.1...
    Connected to 192.168.1.1.
    Escape character is '^]'.
    WL500GP login: root
    Password: (enter the password you use to access the router configuration)


    Tomato v1.23.8532 RAF ND USB


    BusyBox v1.13.2 (2009-01-08 11:25:03 CET) built-in shell (ash)
    Enter 'help' for a list of built-in commands.

    root@WL500GP:/tmp/home/root# nvram show | grep wl0_corerev
    wl0_corerev=9
    root@WL500GP:/tmp/home/root#

    When digit is =>9 then use ND version. If <9 use normal version
     
  9. larc

    larc Addicted to LI Member

    Whew... how do you enter Telnet?
     
  10. Victek

    Victek Network Guru Member

  11. larc

    larc Addicted to LI Member

    Sorry, I still don't understand. I logged in as 'root' and it's still the same Tomato Mod page as usual. I don't get where you're supposed to enter the commands...
     
  12. Victek

    Victek Network Guru Member

    ... open a terminal session in your OS.. (black window in windows) .. and then follow my post.

    *Note= Be careful if you're not familiar with your mouse or keyboard..
     
  13. larc

    larc Addicted to LI Member

    Do you have a help or faq on how to use the bandwidth limiter?

    So we enter our max download/upload on the 'Download Bandwidth' 'Upload Bandwidth' box?

    What's TC Tag? DLCeil? ULCeil? TCP limit?
     
  14. larc

    larc Addicted to LI Member

    You mean command prompt, right. What exactly is special about ND, anyway?

    Well, I googled and found this site explaining it. http://www.easyzonecorp.net/network/view.php?ID=891

    Isn't there a FAQ or readme guide to know the features of your Mod?
     
  15. Victek

    Victek Network Guru Member

  16. RonWessels

    RonWessels Network Guru Member

    Hi Victek. I'm a total n00b at this stuff, and was wondering if you could fly over here to set up my router for me? All this searching and reading is really a drag, and it would be really c001 if you would just set it up for me. I'll buy you a beer when you're done!

    [ Above post dripping with sarcasm to hopefully make a point. ]
     
  17. bripab007

    bripab007 Network Guru Member

    Well, if you wanna be picky, actually, you need to use a terminal, or some other application with a telnet client, in order to log into the router at which point, yes, you would then have a command prompt.:thumbup:
     
  18. Victek

    Victek Network Guru Member

    :biggrin::biggrin::biggrin: Could you wait till summer and might be Tomato 2.0? .. Last time I visited was five month ago, I pick orders for my next visit... :biggrin::biggrin:

    Sorry for the offtopic.:rolleyes:
     
  19. larc

    larc Addicted to LI Member

    Hey, be nice... I know I'm being a cry baby, but I need to be spoon fed about network stuff. I didn't see a sticky or a link explaining all the Vitek's Mod features on his website. Anyway, I'm really thankful that you guys are replying to my posts. :hearts:

    It would be cool if we can monitor bandwidth of use mac/ip address.

    Why did Tomato remove the bandwidth limiter feature? Wasn't that something Tomato had and Vitek just added it back?
     
  20. Victek

    Victek Network Guru Member

  21. GhaladReam

    GhaladReam Network Guru Member

    larc is right... THe BW Limiter was either in Tomato Mod 1.22 or Official Tomato 1.22.. I can't remember which, but I know it was there.
     
  22. Victek

    Victek Network Guru Member

    Obviously you're right in your answer, you pointed both option :biggrin::biggrin::biggrin:... now you have to test which one was not showing the BW limiter :confused:
     
  23. GhaladReam

    GhaladReam Network Guru Member

    lol that's just it, I couldn't remember which one it was :D
     
  24. ceckin

    ceckin LI Guru Member

    Victek can you give me a link fot the SmokePing moded firmware?
     
  25. Victek

    Victek Network Guru Member

    I did not released.
     
  26. dadaniel

    dadaniel Network Guru Member

    @Victek:

    I noticed that with

    Tomato RAF 1.23.8530 ND + USB mod Teddy_Bear Version for ASUS USB Router. Wireless driver Broadcom 802.11-4.130.19.0

    the webinterface dies after saving DDNS details.
    But it may be a single failure, I will look if I can reproduce it
     
  27. Victek

    Victek Network Guru Member

    I think.. did you cleared nvram after upgrade?.. I observed it too and the remedy was to do "as a must" an erase nvram after you upgrade your firmware.
     
  28. dadaniel

    dadaniel Network Guru Member

    I did nvram erase after upgrading
     
  29. sandspike

    sandspike LI Guru Member

    I also noticed some strange behavior on DDNS. It did not update right away, it took about 5 min of hitting refresh every couple of seconds to get it to complete. Normally it takes 5 seconds. It did finally update, but there may be something there.

    This is on an ASUS WL-520GU running 1.23.8530 ND + USB.

    I upgraded the firmware twice and reset the NVRAM twice.
    On the first upgrade, I also experienced a WAN connection problem.
    It got an IP, but no clients could connect to the internet. reuploading the firmware solved that.


     
  30. Victek

    Victek Network Guru Member

    sandspike, thanks for the update, about the double upgrade.. it makes no sense and is a pity cause I don't have the WL520GU to reproduce this behavior, anyway, I'm working in a new release with last update made by Teddy_bear (v09)
     
  31. CBR900

    CBR900 LI Guru Member

    yaaaa

    10x
     
  32. yangxi

    yangxi Addicted to LI Member

    WRT54GL overclock cpu to 240mhz. @Tomato 1.22 speedmod
    Finally PPPOE connection stay longer than 24hrs.

    i think 54gl can't handle p2p bitcomet, xunlei (~2300 connection) with default 200mhz or 216 mhz.
     
  33. spicoli

    spicoli LI Guru Member

    I think I'm being paranoid. It should be safe up to 250MHz, but I never noticed until after overclocking that my router hums, which I didn't notice before. Maybe its just me being crazy, but I went down to 200MHz again with the buzz still there, so I just went to 225 just as a precaution :mad:. I suppose I'll just bump it up to 250 by week's end.
     
  34. GhaladReam

    GhaladReam Network Guru Member

    Vic,

    I'm wondering if there's any way you could integrate OpenVPN. I know Roadkill's mod has it, but I prefer what your Mod has to offer, and would love to see an OpenVPN build.
     
  35. wasp87

    wasp87 Network Guru Member

    Also does the newest 1.23 mod have Speedmod included or was it taken out for some reason? :confused:
     
  36. Victek

    Victek Network Guru Member

    Look at the log messages, it's included.
     
  37. Victek

    Victek Network Guru Member

    As you know the 1.23 RAF releases integrate some of the job done by other colleagues is the forum, the OpenVPN release of Roger is a master piece of integration but unfortunately the available RAM is decreasing and it's a key concern for me (and I think other people). The OpenVPN is under my view a separate release focused for a very specific user segment that don't need other features, then, I think the GUI OpenVPN release is a very good product. Additional features are not required. Here are my two cents.
     
  38. kenyloveg

    kenyloveg LI Guru Member

    Hi, victek
    I'm running your MOD on my WHR2-G54, RAM would never be my problem. It's about 85% free after turn on everything. I used to run that OpenVPN GUI MOD, while i give it up cuz it's kind of complicated for me to connect various devices. But i know there is better VPN solution called OpenSWAN which provide secutiry (IPSEC) and connectivity (no client software needed for most OS). I'm still hopinig someone can compile it and make it happen on Tomato, of course based on your MOD:thumbup:
     
  39. GhaladReam

    GhaladReam Network Guru Member

    RAM would not be an issue for me either.. I have the WRT54GS v2.0 which has 32MB of RAM. My free memory rarely if ever drops below 20MB free. It's up to you, but if you decide to integrate OpenVPN+GUI with all of your Mod's other enhancements (over stock tomato) into a seperate test build, I'd be happy to test.

    Also, does anyone know what features in Victek's mod are missing in Roadkill's OpenVPN build? I'm curious to know, I noticed he has the BW limiter and ARP binding, but I didn't see speedmod or conntrack 8192 users mod.

    If all those features were wrapped into one (and worked stable) then I'd be a happy man :)
     
  40. Victek

    Victek Network Guru Member

    "If all those features were wrapped into one (and worked stable) then I'd be a happy man"

    Agree, this is my main target, to be stable as the Officiial Tomato is.
     
  41. GhaladReam

    GhaladReam Network Guru Member

    Fair enough... Stability is definitely more important than features. That's the main reason I switched from DD-WRT years ago.
     
  42. gsan

    gsan LI Guru Member

    Tomato RAF 1.23.8025.7z format.
    Tomato RAF 1.23.8505ND.7z format.

    these two is the final version?

    btw, the Tomato RAF 1.23.8530 ND + USB mod included the features same as the two above?
     
  43. peyton

    peyton LI Guru Member

    ND stands for New Driver.
    The usb mod one is only for asus router.
     
  44. wasp87

    wasp87 Network Guru Member

    Is there a list anywhere saying which routers can use the New Driver firmware? I've seen it talked about vaguely but nothing specific really.....

    Thanks
     
  45. peyton

    peyton LI Guru Member

    :thumbup:
     
  46. Victek

    Victek Network Guru Member

    Merci beacoup peyton :biggrin:
     
  47. jsmiddleton4

    jsmiddleton4 Network Guru Member

    However, just because a router can "technically" use the ND firmware it may not perform better with it. I've found with multiple routers all of which can use the ND version, I get better connectivity and throughput with the non-nd firmwares.

    Jim
     
  48. Victek

    Victek Network Guru Member

    You're right, the reason for the restricted bandwidth is due to a non complete integration of the ND driver into the firmware, radio a & d band are alive in the actual ND driver and provoke an slowdown in the wireless performance. I think you're the right person to give us a good feedback, update your router with the ND version, test wireless performance and after you got all the statistics (rate, lost packets, bandwidth response, iperf) write these two sentences in the terminal screen (through Telnet):

    Code:
    Tomato v1.23.Dummy_Test_RAF
    
    BusyBox v1.13.2 (2009-01-17 00:22:31 EST) built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    
    root@WL500GP:# nvram set wl_reg_mode=off
    root@WL500GP:# nvram set wl0_reg_mode=off
    root@WL500GP:# nvram commit
    Commit... done.
    And test again versus Intel 2200 b/g cards... please feedback. :), before and after.
     
  49. gsan

    gsan LI Guru Member

    what I meant is

    is that the USB mod included the ip/mac limiter feature as the above 2 firmware, beside got the usb function.
     
  50. wasp87

    wasp87 Network Guru Member

    Very nice, my core revision is 9 so I can use ND :D

    What are the benefits of ND though?...
     
  51. Victek

    Victek Network Guru Member

    1.23.8530 release
     
  52. peyton

    peyton LI Guru Member

    De nada. :tongue:

    Tengo uno 2200BG. Te diría. :biggrin:

    Edición : Esto funciona. :)
     
  53. Dgege

    Dgege Network Guru Member

    Quick question: is there any diffference between Tomato RAF 1.23.8025 and Tomato RAF 1.23.8505ND other that the new drivers? I ask because they have different version number (8025 vs 8505).
    Thanks and great work btw!
     
  54. Victek

    Victek Network Guru Member

    No other, just wireless and ethernet driver.
     
  55. Dgege

    Dgege Network Guru Member

    Excellent, thank you. I will try both and see which one gives me better wireless performance.
     
  56. QSxx

    QSxx LI Guru Member

    What version/revision of WRT54 do you have? Older ones won't profit much from ND version. Newer ones will, like WRT54GL 1.1

    Check this thread: http://www.linksysinfo.org/forums/showthread.php?t=59920

    Cheers!
     
  57. Victek

    Victek Network Guru Member

    wl0_corerev= ? is the answer independent of the model you have..
     
  58. Dgege

    Dgege Network Guru Member

    # nvram get wl0_corerev
    7

    Should I bother with ND?
     
  59. QSxx

    QSxx LI Guru Member

    Not really - stick to normal version then :D
     
  60. Dgege

    Dgege Network Guru Member

    That's what I thought, awesome, thx guys.
     
  61. Dgege

    Dgege Network Guru Member

    ok I have another question now :) Is there a point to having both QoS and QoS Limit enabled, or it should be either the former or latter?
     
  62. Victek

    Victek Network Guru Member

    Both are compatible, the IP/MAC limiter is focused on IP/MAC bandwidth limitation and the QoS is focused into application/program/port priorities. Under my POV the most of the problem can be treated globally, this is why IP/MAC limiter cover all most of the issues sharing a connection.
     
  63. Dgege

    Dgege Network Guru Member

    Thx! I will experiment with the QoS limit
     
  64. M0g13r

    M0g13r LI Guru Member

    hi !
    at first ... nice firm mod thx 4 your work !

    Victek can u readd the sd/mmc feature plz ?!

    greetz -= M0g13r =-
     
  65. kenyloveg

    kenyloveg LI Guru Member

    Hi, victek
    I'm not asking you to add features, but just curious if OpenSWAN is in your plan or not?
    Thanks for the great mod.
     
  66. QSxx

    QSxx LI Guru Member

    Vic, another quick question:

    what does this stands for:

    Code:
    Jan 20 11:16:34 gizmo user.warn kernel: HTB: quantum of class 10011 is small. Consider r2q change.
    Jan 20 11:16:35 gizmo user.warn kernel: HTB: quantum of class 10012 is small. Consider r2q change.
    Jan 20 11:16:37 gizmo user.warn kernel: HTB: quantum of class 10013 is small. Consider r2q change.
    Jan 20 11:16:38 gizmo user.warn kernel: HTB: quantum of class 10014 is small. Consider r2q change.
    Jan 20 11:16:40 gizmo user.warn kernel: HTB: quantum of class 10015 is small. Consider r2q change.
    
    I get it in log every now and then. I assume it has something to do with IP/MAC BW limiter since i have 6 active machines (10010 is missing though, but well).

    Thx
     
  67. johnny2002

    johnny2002 LI Guru Member

    Can't find the file

    Where is it? I can't find :argue:
     
  68. bandyta

    bandyta Addicted to LI Member

  69. Victek

    Victek Network Guru Member

    Has been updated by other version, 8025 and 8505ND... some features, bugs corrected.
     
  70. Toastman

    Toastman Super Moderator Staff Member Member

    Vic, is this the old issue that Phykris addressed?
     
  71. Victek

    Victek Network Guru Member

    I'm not sure about it, longtime without appearing.. and I don't know under what circumstances ...
     
  72. peyton

    peyton LI Guru Member

    I've just install my WRT, erase ram and config all my stuff.
    When i was testing the Bd limiter i discovered it didn't work and when i put the script in firewall and tried to disable the bd limiter in the web ui i have this error message :

    The field "new_qoslimit_obw" is invalid. Please report this problem.
     
  73. Victek

    Victek Network Guru Member

    Yes, you're tryng something funny... you wrote the script that it's supposed writted by BW limiter ;), do erase nvram and then it must work..

    Bon Nuit..
     
  74. peyton

    peyton LI Guru Member

    It's another thing.
    Even if you uncheck "Enable QoS Limit" and want to erase the values it won't work when you'll press the save button.
    If you just uncheck "Enable QoS Limit" and keep untouch the values it will work.

    When i only had the BW Limiter it didn't work that's why i manually put my conf in the firewall script.

    bonne nuit :p
     
  75. nate123

    nate123 Addicted to LI Member

    What is ND

    I know that it stands for New Driver, but what is the advantage of using Viteks Mod, versus Stock tomato 1.23.1607?

    I see that i can support more connections, more mac address blocks, etc.

    are there performance improvements?
     
  76. Victek

    Victek Network Guru Member

    :biggrin::biggrin: These features are not performance improvements?.. welll.. can be eat, can be a heater, you can swim... pfff my God...:confused: and....(tip from a good friend of us..)

    All right, but apart from the sanitation, medicine, education, wine, public order, irrigation, roads, the fresh water system and public health, what have the Romans ever done for us?

    -The Life of Brian
     
  77. Victek

    Victek Network Guru Member

    I'm sure something is wrong in the settings, let's check, Did you fixed the IP into static DHCP before set this IP in the IP/MAC limiter? The values for DL/UP speed has been fixed using a tool like speedtest.net instead of using the synchronization values of your connection?. I had same questions at my e.mail and after we checked the system works very good. What I agree for sure is the system can limit the DL speed when you use a multithread downloader manager with more than 10 threads.
    Please read IP/MAC limiter manual in the forum.

    Kind regards
     
  78. peyton

    peyton LI Guru Member

    Maybe it's just that point but it sounds strange to me. I always checked with speedtest if the limiter was OK.

    I always make it works since my Buffalo (static dhcp, arp binding..).
    i'll do a erase nvram and try again.

    Update : My mistake ! I know what the problem was.
    As I had to config my WRT from scratch I wanted to put an honeypot (1kbps-1kbps-10-1/s) for the only one dhcp address my router give and as it's not a static IP..
    Sorry about that. [​IMG]
     
  79. Victek

    Victek Network Guru Member

    You welcome peyton, we learn from the mistakes (to repeat the same mistake once again) ;)

    Well.... Good news for WRT54Gx and Buffalo users,

    Tomato RAF 1.23.8510 ND is here with:

    *- IP/MAC bandwidth Limiter
    *- 8192 Connection NAT table
    *- 140 users in Restriction Access table.
    *- IMQ up to 16 interfaces
    *- Wireless driver for Ethernet & Wireless v. 4.150.10.5 (fix Intel 2200 b/g included)
    *- RAF features (extended skins, CPU freq & Overclocking, Led Button extended boxes...)
    *- Features of official Tomato.

    And ready to be downloaded from here, Enjoy! :biggrin:
     
  80. peyton

    peyton LI Guru Member

    First ! :)
     
  81. darthboy

    darthboy LI Guru Member

    I see a new driver compared to 1.23.8505's 4.130.19.0. Any other noticable improvements?

    are these 3 new?
    *- Mini UPnPd services / UPnP
    *- IMQ up to 16 Interfaces visible in BW graphic statistics
    *- 140 PC's allowed in Access Restriction / Hasta 140 máquinas permitidas en Access Restriction.
     
  82. Victek

    Victek Network Guru Member

    * - Yes
    * - Yes
    * - No (it's extended from 100 to 140 devices, specially for Hotspot administrators)
     
  83. peyton

    peyton LI Guru Member

    How to set 1 IMQ by Ip address ?

    Can we have some explaination about the Enable NAT-PMP and Inactive Rules Cleaning ?

    Inactive merly be the 24h restart of the service but the other i don't have a clue.
     
  84. Victek

    Victek Network Guru Member

    peyton,

    1st question...
    http://www.linksysinfo.org/forums/showpost.php?p=329539&postcount=127

    2nd question... differences between UPnP and NAT-PMP.. right? Practical case.

    Enable UPnP port mapping allows one application to communicate with the router to forward a port without your manual intervention. Some devices do not support Universal Plug and Play (UPnP), so you might still have to forward your ports manually. Disable UPnP if that is the case

    Enable NAT-PMP port mapping allows the application to attempt to forward a port with routers that support the NAT port mapping protocol, so, with this firmware release ;).

    Example... http://azureuswiki.com/index.php/NATPMP

    3rd question, yes, you're right.
     
  85. Trunkz

    Trunkz LI Guru Member

    @ Victek:

    Sorry if I'm going blind, I'm dead tired. Is there any difference between 8510ND & 8530ND, besides the fact that 8530ND is a beta. I would rather run bleeding edge than stable anyways, but want to know if:

    1) You can run 8530 on a WRT54GL.
    2) Whether its beneficial, stability being exempt.

    Thanks Vik.
     
  86. Victek

    Victek Network Guru Member

    1.23.8510ND for router without USB (size of binary is smaller). Linksys WRT54Gx and Buffalo
    1.23.8530ND for router with USB ports (size of binary is bigger). Asus series..
     
  87. Trunkz

    Trunkz LI Guru Member

    I thought so.. God damned, my eyes are playing mind games again. Thanks again fella ;)
     
  88. GhaladReam

    GhaladReam Network Guru Member

    Not sure if this has been asked before, but I have a WRT54GS 2.0 and I've been reluctant to try the ND firmware because I tried it a long time ago (when Tomato first started to include it) and it gave me issues. Have the ND wireless drivers been updated since that release or are they the same? Also, if I upgrade to 1.23.8510ND from 8025, do I have to flush NVRAM? I'd prefer to be able to keep my settings as there's a lot of them.

    Thanks
     
  89. mstombs

    mstombs Network Guru Member

    Thanks Victek, now have 1.23.8510ND on my WRT54G-TM with fully working miniupnp and wireless drivers 4.150.10.5.

    Next challenge:- multiple ssid's, can it be done with "wl command", these commands accepted - but don't seem to do anything!

    Code:
    # wl ssid
    Current SSID: "wireless"
    # wl ssid --cfg=2 test
    Setting SSID "test"
    # wl ssid
    Current SSID: "wireless"
    # wl ssid --cfg=2
    Current SSID: "test"
     
  90. bripab007

    bripab007 Network Guru Member

    I'm sorry, but can someone give me a quickie link to a) what UPnP server is in normal Tomato builds and b) how/why miniupnp server is/should be better?

    Thanks :)
     
  91. Victek

    Victek Network Guru Member

    You're right mstombs, I was recovering some "old" sources dd-wrt, they did multiple SSID with 4.150.10.5 before ... I think there is something lost. By the way, multiple SSID was tested on earlier release build by Teddy_Bear successfully on my test but no SSID broadcast was detected. Let's continue a more relaxed research since we have a full Intel 2200 b/g wireless section in Tomato.
     
  92. Victek

    Victek Network Guru Member

    You welcome
     
  93. gbimmer3

    gbimmer3 Addicted to LI Member

    What is P2P obfuscation and how do I use it?
     
  94. Victek

    Victek Network Guru Member

    Welcome to the forum, be wise man and use PM option....
     
  95. Toink

    Toink Network Guru Member

    Thanks Victek for the new builds! :)

    I have some strange thing going on with my WRT54GS v1.1 right after updating to the 8510ND, though. My power LED is continuously flashing. :eek: All the other LEDs are 'normal'.

    Everything else seems to be normal, as I can connect to the router, browse the net and all... This never happened in your previous Tomato_RAF_1.23.8505ND build... :confused:

    As always, I erased its RAM before and after the flash....
    ==========
    UPDATE:

    Fixed!! :)

    I flashed back to 8505ND. Cleared RAM and upgraded to 8510ND :)
     
  96. gsan

    gsan LI Guru Member

    found 1 bug

    after click 'measure' on the device list, the wifi is no longer available, even thought it it still enable.
     
  97. Victek

    Victek Network Guru Member

    gsan, let us know wich model router are you using, I tried to reproduce your issue, the firmware works ok on WRT54GL, look for images, before and after measurement.

    [​IMG]

    once clicked and after radio measurement floor level.. back to the screen and after 3-5 sec...

    [​IMG]
     
  98. Badders44

    Badders44 LI Guru Member

    I can confiirm the same as 'gsan'. Performed 'Measure' from a wireless client - the wireless never came back up - had to reboot the router. (Possibly the same result if doing a Wireless Survey - I'll confirm and report back). ** Confirmed **

    (Great firmware BTW :) )
     
  99. Toink

    Toink Network Guru Member

    I could not reproduce the Noise floor measure 'bug' reported by gsan and badders as well. It works well on my WRT54GS v1.1

    AFAIK, once you measure, your wireless device/s will get disconnected but will reconnect after 2-3 secs - at least that's what always happens to me.

    If my memory serves me right, this glitch happened in vanilla builds 1.19 (? any one can correct me though...) but was later corrected in the later builds. Since then all is working just fine.
     
  100. Badders44

    Badders44 LI Guru Member

    OK - I'll move this forward by upgrading to 1.23.8510ND and re-testing - thanks for checking Toink. I'll be back in a day or so.

    gsan, what router do you have?
     
Thread Status:
Not open for further replies.

Share This Page