1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Vista with QuickVPN not working

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Glock27922, Feb 24, 2009.

  1. Glock27922

    Glock27922 Guest

    I have seen a lot of people having this issue but no real solutions.

    I have a wrv210 (firmware version 1.1.16) and QuickVPN software (version 1.2.11)

    When I try to connect to my VPN using Windows XP machine everything is just fine. When I try to connect using my Vista computer I get "The remote gateway is not responding"

    I have tried the Vista machine with the firewall on and off, and when it's on it allowed access through for ports 500 and 4500 with no luck. AT on point a few weeks ago it did work but I have to get a new router which is now the WRV210.:mad:

    Log from the Vista machine:

    09/02/23 23:21:51 [STATUS]OS Version: Windows Vista
    2009/02/23 23:21:51 [STATUS]Windows Firewall Domain Profile Settings: ON
    2009/02/23 23:21:51 [STATUS]Windows Firewall Private Profile Settings: ON
    2009/02/23 23:21:51 [STATUS]Windows Firewall Private Profile Settings: ON
    2009/02/23 23:21:51 [STATUS]One network interface detected with IP address 192.168.0.109
    2009/02/23 23:21:51 [STATUS]Connecting...
    2009/02/23 23:21:51 [STATUS]Connecting to remote gateway with IP address: **.**.**.*
    2009/02/23 23:21:53 [STATUS]Remote gateway was reached by https ...
    2009/02/23 23:21:53 [STATUS]Provisioning...
    2009/02/23 23:22:03 [STATUS]Tunnel is connected successfully.
    2009/02/23 23:22:03 [STATUS]Verifying Network...
    2009/02/23 23:22:07 [WARNING]Failed to ping the remote VPN Router!
    2009/02/23 23:22:08 [WARNING]Failed to ping the remote VPN Router!
    2009/02/23 23:22:09 [WARNING]Failed to ping the remote VPN Router!
    2009/02/23 23:22:10 [WARNING]Failed to ping the remote VPN Router!
    2009/02/23 23:22:11 [WARNING]Failed to ping the remote VPN Router!
    2009/02/23 23:22:13 [WARNING]IKE was blocked, which can be caused by a firewall blocking the UDP port 500 or 4500.
    2009/02/23 23:22:14 [STATUS]Disconnecting...
    2009/02/23 23:22:24 [STATUS]Tunnel is disconnected successfully.
     

Share This Page