1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VLan help on E4200V1 and Totmato RAF V1.28

Discussion in 'Tomato Firmware' started by Ohannis, Nov 1, 2013.

  1. Ohannis

    Ohannis Reformed Router Member

    I setting up two IP ranges at the office one is 192.168.1.x and the other is 192.168.10.x. I have done the following.
    Under Basic>Network >LAN section created br1 with an ip address of 192.168.10.1
    Under Advanced>Vlan I have created VID 3 and assigned port 1 and 3 and br1.

    The default ip range of the router that is assigned to br0 is the 192.168.1.1. from any machine on the network that is using an ip of 192.168.1.x can ping ip addresses from 192.168.10.x but when I try to ping any address from 192.168.10.x to an ip 192.168.1.x I get one reply then it times out. The situation is the same when I try to ping and external ip from 192.168.10.x. Is there a rule that I need to add to the firewall script? any help will be appreciated.
    Thanks
     

Share This Page