1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VLAN limiter

Discussion in 'Tomato Firmware' started by eahm, Feb 10, 2013.

  1. eahm

    eahm LI Guru Member

    Is shibby20's the only mod that can BW Limit br1/br2/br3? I've tried with Toastman but I couldn't find the option.

    This is a deal breaker for me for public/commercial places.
  2. eahm

    eahm LI Guru Member

    The upload limiter on br1 doesn't work. I insert 400 and it keeps uploading at ~5000.

    If I limit "Max Available Upload" to 400 everything works but that's br0 I can't keep that limited.

    If Captive Portal is disabled on br1, the limiter works wonderfully.

    Confirmed, if Captive Portal is disabled the limited works perfectly.
  3. eahm

    eahm LI Guru Member

  4. shibby20

    shibby20 Network Guru Member

    Imo only my mod support limit speed for others bridges. You have right about captive portal. If its enabled. Then upload limit does not work. But IMO its not a fault of bw limiter. Captive portal will overwrite bw settings and IMO if you will enable CP on br0 on others mods then upload will also does not work

    Best regards
  5. eahm

    eahm LI Guru Member

    Just the Upload BW Limiter doesn't work :) ...at least what I've tested.

    Thanks for this limiter btw, I really like it. Finally I have a reason to test QoS and BW Limiter on Tomato. I've been using tomato for many years, never had a chance to care to use it.
  6. eahm

    eahm LI Guru Member

    How do you limit br1/br2/br3 without touching br0 with QoS?

Share This Page