1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VLAN on Tomato

Discussion in 'Tomato Firmware' started by SiLeK, Feb 1, 2007.

  1. SiLeK

    SiLeK Network Guru Member

    Is it possible on WRT54G + Tomato to split network into 2 logical separated subnetworks? I read about VLAN on DD WRT, but i can't find it in Tomato.
    Or maybe simpler will be setting 2 subnet masks, but where in Tomato is it?
    Network look like this:
    [​IMG]

    Computers from one subnetwork should not see computers from second subnetwork.
     
  2. u3gyxap

    u3gyxap Network Guru Member

    I am not sure if you can achieve all that via the GUI, but you can do it via the CLI.
     
  3. SiLeK

    SiLeK Network Guru Member

    I know I can't do it via GUI, because there is no such option. Any suggestions how to do it via CLI.
    Anybody tried this?
     
  4. u3gyxap

    u3gyxap Network Guru Member

  5. SiLeK

    SiLeK Network Guru Member

    Thanks. What soft do you have on your router? OpenWRT? Can I do that only on this soft?
     
  6. u3gyxap

    u3gyxap Network Guru Member

    No, I run tomato and DD-WRT. It should be the same.
     

Share This Page