VPN and mutil subnet

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by paulhuynh, Oct 8, 2008.

  1. paulhuynh

    paulhuynh LI Guru Member

    Site 1 i have rv082 (ip is 192.168.32.191)
    192.168.32.0/255.255.255.0

    I also have mutil subnet set up on here as well (192.168.32.1=our cisco 1811 which is a vpn router to the rest of my network via mpls)
    192.168.34.0/255.255.255.0 (advance routing table to 192.168.32.1)


    Site 2 i have rv042 (ip is 192.168.46.1)
    192.168.46.0/255.255.255.0

    VPN between 192.168.46.0/255.255.255.0 and 192.168.32.0/255.255.255.0
    both work perfectly

    However i cant seem to get any traffics from 192.168.46.0/255.255.255.0 to go 192.168.34.0/255.255.255.0

    It should work because it should go from 192.168.46.0 to 192.168.32.1 and then pass on to 192.168.34.0

    ANy help would be great
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice