1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VPN between two (TOMATO firmware) ROUTERS

Discussion in 'Tomato Firmware' started by dufoq3, Apr 30, 2012.

  1. dufoq3

    dufoq3 Networkin' Nut Member

    Hi,

    I'm using both routers ASUS RT-N16

    VPN server firmware: 1.28.9054 MIPSR2-beta K26 USB vpn3.6
    VPN client firmware: 1.28.7497 MIPSR2-Toastman-RT K26 USB VPN

    -----------------------------------------------------------------------------

    Trying to setup VPN between two routers.

    server subnet: 192.168.2.0
    client subnet: 192.168.100.0

    My problem is:
    I can ping from client subnet to server
    but I can't ping from server subnet to client

    server settings:
    https://www.dropbox.com/s/y42zwz57xzxr8ci/VPN Server - BASIC.png
    https://www.dropbox.com/s/jz53xhtzq3wz5r3/VPN Server - ADVANCED.png

    client settings:
    https://www.dropbox.com/s/9h604ji6q4abq68/VPN Client - BASIC.png
    https://www.dropbox.com/s/h219iaa9nmxdon4/VPN Client - ADVANCED.png

    Thanks
     
  2. dufoq3

    dufoq3 Networkin' Nut Member

    I think the problem is with routing but don't know how to setup.
     
  3. dufoq3

    dufoq3 Networkin' Nut Member

  4. gfunkdave

    gfunkdave LI Guru Member

    You might need to check the Respond to DNS and Allow Only These Clients boxes. Also make sure the that common name you list matches the common name on your client certificate exactly. Reboot both routers and re-establish the connection.
     
  5. dufoq3

    dufoq3 Networkin' Nut Member

    Hi - thanks for reply, I tried it, but connection failed

    It's weird, if I uncheck "Respond to DNS" and "Allow only These Clients"connection is established...
     
  6. gfunkdave

    gfunkdave LI Guru Member

    You're getting "authentication failed" messages either way. Check that your certificates are correct.
     
  7. dufoq3

    dufoq3 Networkin' Nut Member

    problem SOLVED:

    I used bad COMMON NAME in SERVER ----> ADVANCED. (I used duFo - HOME, not client-duFo3 ---> which was right)

    Thanks for your time gfunkdave.
     

Share This Page