1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Vpn connection problem

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by fanadonf, Sep 23, 2006.

  1. fanadonf

    fanadonf Network Guru Member

    Hello
    I have some problem with a vpn connection between rv082 and netgear FVS318

    rv082-----------------> Modem linksys BEFDSR41W ------> FVS318
    (no fixe @)


    The adsl modem have fixed @ -->and dhcp active (192.168.1.1) for FVS318

    RV082 ----------- WAN --------Modem--------wan FVS318---Lan 10.5.10.254
    (dyndns) 82.238.x.x 192.168.1.1
    lan 10.5.0.254

    In RV082 config :

    Local group :
    ip only .....
    subnet 10.5.0.0
    255.255.255.0

    Remote group
    ip only 82.238.x.x
    subnet 10.5.10.0
    255.255.255.0

    (same crypto config and key.)

    The vpn between RV082 and FVS318 don't work... can u help me ?

    Regards

    François
     
  2. fanadonf

    fanadonf Network Guru Member

    I have this in my vpn log on rv082 :

    No suitable connection for peer '192.168.1.100', Please check Phase 1 ID value
    (192.168.1.100 is "wan ip adresse giving by the modem to FVS318

    on FVS318 vpn logs :

    Sun, 09/24/2006 08:33:50 - FVS318 IPsec:event after this is EVENT_RETRANSMIT in 4 seconds
    Sun, 09/24/2006 08:33:50 - FVS318 IPsec:handling event EVENT_RETRANSMIT for 500b8a2b "ciw" #1
    Sun, 09/24/2006 08:33:50 - FVS318 IPsec:max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first enc
    Sun, 09/24/2006 08:33:54 - FVS318 IPsec:handling event EVENT_RETRANSMIT for 500b8a2b "ciw" #2
    Sun, 09/24/2006 08:33:54 - FVS318 IPsec:inserting event EVENT_RETRANSMIT, timeout in 40 seconds for #2
    Sun, 09/24/2006 08:34:12 - FVS318 IPsec:call ipsecdoi_initiate
    Sun, 09/24/2006 08:34:12 - FVS318 IPsec:New State index:0, sno:3
    Sun, 09/24/2006 08:34:12 - FVS318 IPsec:Initiating Main Mode
    Sun, 09/24/2006 08:34:12 - FVS318 IKE:[ciw] Initializing IKE Main Mode
    Sun, 09/24/2006 08:34:12 - FVS318 IKE:[ciw] TX >> MM_I1 : 80.11.X.X
    Sun, 09/24/2006 08:34:12 - FVS318 IPsec:inserting event EVENT_RETRANSMIT, timeout in 10 seconds for #3
    Sun, 09/24/2006 08:34:12 - FVS318 IPsec:Receive Packet address:0x1397554 from 80.11.138.43
    Sun, 09/24/2006 08:34:12 - FVS318 IKE:[ciw] RX << MM_R1 : 80.11.x.X
    Sun, 09/24/2006 08:34:12 - FVS318 IPsec:Oakley Transform 3 accepted
    Sun, 09/24/2006 08:34:12 - FVS318 IKE:OAKLEY_PRESHARED_KEY/OAKLEY_3DES_CBC/MODP1024
    Sun, 09/24/2006 08:34:12 - FVS318 IKE:[ciw] TX >> MM_I2 : 80.11.X.X
    Sun, 09/24/2006 08:34:12 - FVS318 IPsec:inserting event EVENT_RETRANSMIT, timeout in 10 seconds for #3
    Sun, 09/24/2006 08:34:14 - FVS318 IPsec:Receive Packet address:0x1397554 from 80.11.138.43
    Sun, 09/24/2006 08:34:14 - FVS318 IKE:[ciw] RX << MM_R2 : 80.11.x.X
    Sun, 09/24/2006 08:34:14 - FVS318 IKE:[ciw] TX >> MM_I3 : 80.11.x.X
    Sun, 09/24/2006 08:34:14 - FVS318 IPsec:inserting event EVENT_RETRANSMIT, timeout in 10 seconds for #3
    Sun, 09/24/2006 08:34:22 - FVS318 IPsec:event after this is EVENT_RETRANSMIT in 12 seconds
    Sun, 09/24/2006 08:34:22 - FVS318 IPsec:handling event EVENT_RETRANSMIT for 500b8a2b "ciw" #3
    Sun, 09/24/2006 08:34:22 - FVS318 IPsec:inserting event EVENT_RETRANSMIT, timeout in 20 seconds for #3
    Sun, 09/24/2006 08:34:34 - FVS318 IPsec:event after this is EVENT_RETRANSMIT in 8 seconds
    Sun, 09/24/2006 08:34:34 - FVS318 IPsec:handling event EVENT_RETRANSMIT for 500b8a2b "ciw" #2
    Sun, 09/24/2006 08:34:34 - FVS318 IPsec:max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first enc
    Sun, 09/24/2006 08:34:42 - FVS318 IPsec:handling event EVENT_RETRANSMIT for 500b8a2b "ciw" #3
    Sun, 09/24/2006 08:34:42 - FVS318 IPsec:inserting event EVENT_RETRANSMIT, timeout in 40 seconds

    Any idea ?
     
  3. DocLarge

    DocLarge Super Moderator Staff Member Member

    Francois,

    Toxic and I need to see a screen capture of the vpn page of your FSV318; he has an RV0X router and I have a Netgear VPN router that has a setup similar to your netgear router...

    Jay
     

Share This Page