1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VPN Help Needed.

Discussion in 'Networking Issues' started by martinivo, Jan 8, 2007.

  1. martinivo

    martinivo LI Guru Member

    Hello Everyone,

    I posted a problem a few days ago and got really good feedback so hopefully the second time will be a charm also. I have 1 Linksys VPN router model WRV54G. It is hooked up to my office's broadband connection with a static IP. I would like to connect to my office's network from home using Linksys's QuickVPN or from any other location (usually with a dynamic IP). Is it possible to create a VPN connection by using only one router or do I need to have 2 VPN routers? Thanks and hope to hear from you all soon.

  2. Toxic

    Toxic Administrator Staff Member

    you only need the one router at the remote site (office) setup the QuickVPN client username and password on the WRV54G WebGUI. then install the QuickVPN Client software on your home/laptop computer. then when you run QVPN from the PC you enter the IP address of your Office router (the WAN IP address) and put in the username/pwd that you setup on the WRV54G into the software and connect.

Share This Page