1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VPN HTTP traffic not working with Shibby build

Discussion in 'Tomato Firmware' started by cr00kedview, Sep 15, 2012.

  1. cr00kedview

    cr00kedview Network Guru Member

    Been tinkering with VPN this weekend between 2 routers (E4200 and WL-520GU). I can see the remote machines in My Network Places, but when I try to turn on internet traffic redirection I'm not able to browse any websites.

    I'm using TLS and Create NAT on Tunnel is unchecked on the client. Interface type is TUN and protocol is TCP.

    Are there any other settings outside of the VPN pages that could affect this?
  2. maurer

    maurer LI Guru Member

    try with TAP
  3. Powerdog

    Powerdog Serious Server Member

    I agree with the TAP suggestion. It shouldn't make a difference but any reason you chose TCP instead of UDP?

    Can I ask what build you're using on the WL-520GU?
  4. ronni303

    ronni303 Serious Server Member

    go with udp
  5. ronni303

    ronni303 Serious Server Member

    try the second server without tls.key and the cypher to aes 256 cbc
  6. ronni303

    ronni303 Serious Server Member

    and dont use the same subnet on both sites ;)

Share This Page