1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VPN Incomings dont work on WRT54G v3.1 with HyperWRT

Discussion in 'HyperWRT Firmware' started by HansiHusten, Mar 12, 2006.

  1. HansiHusten

    HansiHusten Network Guru Member

    Good evening guys,

    im having as stated above a WRT54G running with HyperWRT Stable 2.0.

    Im running a W2003 Server in my LAN with configurated VPN L2TP with IPSec. But i cant connect from WAN to this VPN, it works from LAN.
    Ive set Passthru for L2TP and IPSec to enabled but it doesnt work. Also forwarded ports 1701 and 500.

    Now im asking myself if i should change my firmware, but which should i choose? And how do i know that then my VPN does work?

    Would be great if some1 could help me.
  2. jgutz20

    jgutz20 Network Guru Member

    U know for sure that its not PPTP? (port 1723)
  3. HansiHusten

    HansiHusten Network Guru Member

    im 100% sure that ive set everything ok for l2tp.
    as i wrote before, the 'dailin' works over lan...
  4. jgutz20

    jgutz20 Network Guru Member

    K, i believe the port u need to forward is 500, not 550
  5. HansiHusten

    HansiHusten Network Guru Member

    aaargs my mistake, my mistake :eek:
    ive had 500 all the time i only wrote 550 - args looks like i was alittle bit on drugs :eek:
    sorry hehe

    So you think its not the actual firmwares fault? Or should i switch to another?
  6. jgutz20

    jgutz20 Network Guru Member

    i have a hard time believing its the firmware but its pretty easy and quick trying to flash it, give that a shot. I'd try re-flashing it and wipe all the settings and re-configure them just to eliminate the possibility that you are missing something simple.
    Ive used Alchemy, Satori, Talisman and now DD_WRT and i've never had a problem with VPN passthrough although i dont think hyperwrt is the cause.

    What are you using on server 2003 for the VPN? what kind of settings

Share This Page