1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VPN "Linksys BEFVP41 - Symantec SGS 360R" ??? HELP

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by adamski74, May 31, 2005.

  1. adamski74

    adamski74 Network Guru Member

    I have in my company Symantec Gateway Security 360R. I must connect external
    office (network over vpn to sgs (local network In office I have Linksys router BEFVP41. How may I
    correctly setup router BEFVP41 (or SGS 360R)?
    In logs on SGS I have: "

    end of log
    VPN_test - Terminating connection
    VPN_test - Sending ISAKMP OAK INFO (Notification IKE SA)
    VPN_test - state transition function for STATE_QUICK_R0 failed.
    VPN_test - (null): NO_PROPOSAL_CHOSEN
    VPN_test - ERRno acceptable Proposal in IPSec SA
    VPN_test - STATE_MAIN_R3 sent MR3, ISAKMP SA established
    VPN_test - STATE_MAIN_R2: from STATE_MAIN_R1; sent MR2; expecting MI3
    VPN_test - STATE_MAIN_R1: from STATE_MAIN_R0; sent MR1; expecting MI2
    VPN_test - Responding to Main Mode from Remote Peer xxx.xxx.xxx.xxx
    start of log

    In Linksys log:
    2005-05-31 08:07:03
    2005-05-31 08:07:03 IKE[1] Tx >> MM_I1 : SA
    2005-05-31 08:07:03 IKE[1] Rx << MM_R1 : SA
    2005-05-31 08:07:03 IKE[1] ISAKMP SA CKI=[a153049e 5f5b6719] CKR=[6afe57b2 cd7d3460]
    2005-05-31 08:07:03 IKE[1] ISAKMP SA 3DES / MD5 / PreShared / MODP_1024 / 3600 sec (*3600 sec)
    2005-05-31 08:07:03 IKE[1] Tx >> MM_I2 : KE, NONCE
    2005-05-31 08:07:04 IKE[1] Rx << MM_R2 : KE, NONCE
    2005-05-31 08:07:04 IKE[1] Tx >> MM_I3 : ID, HASH

    What does mean?

    I tried config with enabled and disabled IPSec Passthrough, PPPOE, PPPTP, MD5, SHA and disabled PFS, without success.

    Has someone VPN Symantec 300'series - Linksys maybe?

    Best regards
    Adam Macholl
  2. TazUk

    TazUk Network Guru Member

    Can you post back screen dumps of the configuration at both ends?
  3. DocLarge

    DocLarge Super Moderator Staff Member Member

    What is the vpn client you are using if I may ask and how exactly are you configuring it?

  4. adamski74

    adamski74 Network Guru Member

    DocLarge: On notebook I use Symantec VPN Client for connecting to SGS 360R. I don't connect from notebook to Linksys over VPN.
    I must connect Linksys to SGS 360R over VPN - connection network to network, not PC to network.
    TazUk: please give me your email address.

Share This Page