I've tried dd-wrt.v22-final-r2 & 19.10.05-dd-wrt.v23.mini_beta2 on my wrt54g v3. Both have the same problem: I can connect to the vpn server. Also from the status bar, I can see that all traffic goes through vpn. But I cannot see other local computers on the LAN. Here is my setup: pptp server enabled. server ip 192.168.1.1 client ip 192.168.1.200-220 CHAP-Secrets user * passwd * Loopback disabled. For the client computer I have the following ipconfig about vpn: ip address: 192.168.1.200 subnet mask: 255.255.255.255 default gateway: 192.168.1.200 For the computer connected to my router directly I have: ip address: 192.168.1.103 subnet mask: 255.255.255.0 default gateway: 192.168.1.1 Is my problem caused by the differences in subnet mask and default gateway between vpn client computer and local computer? What should I do to solve the problem? Thanks for help. Another not related question: The yellow light on the front panel (left to the green power light) seems always on after recent firmware upgrade. How can I turn it off?