1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VPN routing problem with BEFSX41

Discussion in 'General Discussion' started by Blobbi, Feb 10, 2006.

  1. Blobbi

    Blobbi Guest

    I've been banging my head for the last four hours with the given task to create a VPN connection between two BEFSX41's. I got the VPN running fine and I can ping the box on other end, but nothing in the LAN.

    I'm running the latest firmware version 1.52.9 on both boxes. Here's the VPN setup:

    Office

    Local Secure Group: Subnet 192.168.1.0/255.255.255.0
    Remote Secure Group: Subnet 192.168.2.0/255.255.255.0
    Remote Security Gateway: Any

    Home

    Local Secure Group: Subnet 192.168.2.0/255.255.255.0
    Remote Secure Group: Subnet 192.168.1.0/255.255.255.0
    Remote Security Gateway: WAN IP-address of the BEFSX41

    The VPN connected nicely:

    00:03:21 IKE[1] Set up ESP tunnel with 85.76.5.XXX Success !

    The ping responds to the local address (192.168.1.1) of the BEFSX41 at the office. But when I try to ping anything else in the network, nothing. I'm certain that there should be a response, since I ping them from the Diagnostics of the Office box. Actually there is one WRT54G, with the the IP 192.168.1.2. So somehow the routing isn't working. Naturally I can't access anything from the end side office network. Should make I static route or something? I thought the tunnel should handle it.

    Any ideas why it ain't working? I've been trying to get this thing working for the four past hours and i'm starting to get frustrated... :eek:
     

Share This Page