VPN Site-to-Site - exception route for local server

Discussion in 'Tomato Firmware' started by reddwarf, Feb 14, 2012.

  1. reddwarf

    reddwarf Networkin' Nut Member

    I have setup a site to site vpn, but need access to a local server.

    Tomato Firmware v1.28.7495 MIPSR2-Toastman-RT K26 VPN

    I can access the internet, remote servers, etc.. through the vpn fine. What I want to do is access a local server (on a different subnet) not going through the VPN tunnel.

    I added a route on the local router to handle this, and when I telnet into the router I can ping a server on the local network. However clients attached to the router cannot.

    Local subnet (router external IP - 10.4.7.XX)
    Local server (10.2.7.XXX) - can ping address from router.
    Client (192.168.1.103) - cannot ping.
     
  2. SgtPepperKSU

    SgtPepperKSU Network Guru Member

    TAP or TUN? Can you provide the routing table from your local router, the pinging device, the to-be-pinged server, and the (presumed) router between the two?
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice