1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

VPN to a Watchguard Firebox

Discussion in 'HyperWRT Firmware' started by ditro, Jun 21, 2006.

  1. ditro

    ditro LI Guru Member

    Hello There,

    is it possible to build a vpn tunnel to a watchguard firewall??

    I'm using v4.71.1, Hyperwrt 2.1b1 + Thibor15c

    greetz ditro
     
  2. Toxic

    Toxic Administrator Staff Member

    as yet, thibors firmware does not support VPN tunneling, however you could if watchguard supports it, setup the VPN access direct from your PC with VPN passthrough enabled on the WRT
     
  3. ditro

    ditro LI Guru Member

    thx,

    i'll try that ;-)
     
  4. BCan

    BCan Network Guru Member

    It works, We have that for our work. Use their software on the PC, let the firewall know it needs to go out, and then as Thibor said - let it pass through the router.

    No problems from my end with this VPN software and Thibor's firmware - very sold, very handy
     
  5. BCan

    BCan Network Guru Member

    I want to set it up the way you are asking (A tunnel from my router to work's router)

    I believe newer linksys models support vpn tunneling, and I think DD-WRT does as well
     
  6. Toxic

    Toxic Administrator Staff Member

    DDWRT has a a PPTP Server, so it your Works router supports that protocol as well you can have your VPN tunnel.
     

Share This Page