1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG 200 Web Interface not responding after firmware flash

Discussion in 'Other Linksys Equipment' started by jonathanptew, Apr 14, 2012.

  1. jonathanptew

    jonathanptew Serious Server Member

    Hi,

    I've had a read through several forums and I have some weird behavior with my WAG200.

    A while ago I flashed the firmware to a stock linksys version which I can't remember. The flash seemed to retain all the WAN/WLAN/LAN settings and continued to function as a DSL router should.

    The main issue now is that since the flash of the firmware I have been unable to access the web server on port 80. If I do a port scan the port is open but I don't seem to get a 2xx,3xx,4xx or 5xx response from it.

    Is there any way to flash the device when it is in this state?
     
  2. jonathanptew

    jonathanptew Serious Server Member

    Thanks, no SSH/telnet so only option is JTAG.

    I'll get a cable of eBay and experiment with that.
     

Share This Page