1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG 54GS V1.00.08 How to get line stats?

Discussion in 'Other Linksys Equipment' started by sathound, Apr 8, 2006.

  1. sathound

    sathound Guest

    Is it possible to access line stats with this model.

    e.g. Line attenuation and SNR. This was simple from my previous Netgear DG834GT router.
     
  2. zahgurin

    zahgurin Guest

    not simple, but...


    Turn on debug mode:

    http://192.168.0.1/setup.cgi?todo=debug

    Telnet to the router:

    $ telnet 192.168.0.1

    $ adslctl info --stats
    adslctl: ADSL driver and PHY status
    Status: Showtime Channel: FAST, Upstream rate = 256 Kbps, Downstream rate = 2048 Kbps
    Link Power State: L0
    Mode: G.DMT
    Channel: Fast
    Trellis: ON
    Line Status: No Defect
    Training Status: Showtime
    Down Up
    SNR (dB): 30.0 30.0
    Attn(dB): 26.5 11.0
    Pwr(dBm): 18.6 11.6
    Max(Kbps): 8768 1024
    Rate (Kbps): 2048 256
    ---K--- snip ---K---


    Hope this helps
    Si
     
  3. rhino6666

    rhino6666 LI Guru Member

    Hi

    I have been trying to use this method for my WAG54G ver 1.2 but without success - tried 192.168.1.1

    Does anyone know how I can get stats like attenuation off my particular version of this modem/router.

    Cheers

    Rob
     
  4. fedro

    fedro Network Guru Member

    where did you find the V1.00.08 kernel?
    I've seen it in the GPL area on linksys.com but not already compiled.
    (and what's new in it!!!]

    thanks
    fedro
     
  5. fedro

    fedro Network Guru Member

  6. HiSpeed

    HiSpeed Network Guru Member

    Hi,

    If you have 1.02.7 firmware at least, try this script ! ;)
     
  7. rhino6666

    rhino6666 LI Guru Member

    'If you have 1.02.7 firmware at least, try this'

    Tried the executable but unfortunately it didn't work and there are no firmware upgrades available on here. Unfortunately it looks like I may have to replace this router/modem, which was new less than 18 months ago :sadbye:
     
  8. wilko81

    wilko81 Network Guru Member

    Any chance somebody can post v1.00.08 for the WAG54GS? Does it fix the wireless speed slowdown/disconnection problem? Thanks
     
  9. rhino6666

    rhino6666 LI Guru Member

  10. HiSpeed

    HiSpeed Network Guru Member

    :thumb:

    With my WAG54G 1.2 - 1.03.1 I get the following result but with my WAG54G 2.0 - 1.02.00 the graph is missing... :shock:

    [​IMG][/img]
     

Share This Page