WAG200g Annex A 3rd party firmware???

Discussion in 'Other Firmware Projects' started by Ruben1987, Nov 19, 2007.

  1. Ruben1987

    Ruben1987 Guest

    Hi guys, im new on this forum. I'm a frequent linksys user so i thought joining this community would help me getfurther into linksys.:rolleyes::tongue:

    My question is:

    Is there any 3rd party firmware for the WAG200G?

    And is it possible to use my WAP54G as a bridge for the wireless signal?

    Thnx in advance people!:biggrin:
     
  2. mstombs

    mstombs Network Guru Member

    The only 3rd party firmware for the WAG200G is the one in the next thread in this forum - by woytekm. Its a rebuild of the Linksys GPL sourcecode with additional features - guess lots of others started that way as well!

    For the WAP54G have a look at dd-wrt.
     
  3. Mothersh1p

    Mothersh1p Addicted to LI Member

    WAG200G - alternative firmware - Annex A

    "This firmware is a big hack to crack the torrent limit of just 2 torrents at the same time in the original firmware v1.01.06 by using the dstlimit modul from iptables to limit incomming traffic. I have also done some speed improvement and kernel patches. See changelog for more. I have tested it with tons of torrents, and it works like a charm. The performance is awesome."

    You can get it here: http://tinyurl.com/6lmsxm.
     
  4. mstombs

    mstombs Network Guru Member

    No Annex A firmware on that link!
     
  5. Mothersh1p

    Mothersh1p Addicted to LI Member

    I have added a precompiled Annex A firmware.
    Have a lot of fun!
     
  6. kabaiver

    kabaiver Guest

    Can I flash my WAG200G to convert it from AnnexA to AnnexB ?
     
  7. Mothersh1p

    Mothersh1p Addicted to LI Member

    Thats depends on the hardware. I think it should be possible, because the driver for Annex A/Annex B are included and flashing the bad driver shouldn't brick the device, too. At least you should be able to re-flash. Anyway my Greek-Friends are using my firmware without any problem, and I doubt they are using Annex B.
     
  8. Divakaran

    Divakaran Network Newbie Member

    Hi - from where i can download this woytekm 0.8 code? please provide me the link
     
  9. Divakaran

    Divakaran Network Newbie Member

    Hi - please give me the url from where i can download this?
     
  10. PetervdM

    PetervdM Network Guru Member

    annex A and annex B means different h/w. annex A is analogue, POTS and annex B is ISDN. so flashing annex B s/w on annex A h/w ( or the other way around ) will yield a non-functional device, or even brick it.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice