1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wag200g - Block p2p help

Discussion in 'Other Linksys Equipment' started by stevenhp1987, Aug 23, 2007.

  1. stevenhp1987

    stevenhp1987 LI Guru Member

    Hello, I recently purchased a WAG200g. This is for a home student house & I would like to block p2p on the router.

    Please let me know how to do this, the standard user interface only allows for 2 blocked port ranges.

    Thanks (Please give more detailed instructions than just "install custom firmware" unless the custom firmware has a nice easy interface) - I was thinking of blocking all traffic apart from the ports that I know I will require.
     
  2. stevenhp1987

    stevenhp1987 LI Guru Member

    Okay, I've found woytekm's custom firmware.

    I can ssh into the router, but I know little of linux and therefore how would I go about writing a custom firewall script and then placing it into the directory.

    All I want to do is block all ports and then open up certain ones, cheers.
     
  3. ReDFlaG

    ReDFlaG Network Guru Member

    2 *10 = 20 port ranges, isn't that enough?

    2 ranges, 10 rules.
     
  4. stevenhp1987

    stevenhp1987 LI Guru Member

    Its only allowing me to block two port ranges here...

    More importantly, does someone know how to write a custom firewall script for this... Information will be helpful thank you :)
     
  5. ReDFlaG

    ReDFlaG Network Guru Member

Share This Page