1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG200g - disconnects.. no auto-reconnect

Discussion in 'Other Linksys Equipment' started by sam_linksysinfo, May 4, 2007.

  1. mindstorm

    mindstorm LI Guru Member

    Hi guys, same here.
    I know that my cable have a lot of noise (my downstream margin is about 8-10db)
    But when some extra noise happens I got a value of about 2xxxxxxxxx and the router begins to became unstable with multiple and continous disconn/reconnections; unpluging cable (or resetting the router) solves this.

    I can accept that my line can go down once or twice per day, but router shouldn't became so unstable in connection.
    Maybe a bug in the firmware?

    Bye, Mind
     
  2. mindstorm

    mindstorm LI Guru Member

    I tried to fix this by loading firmwares 1.00.09, 1.01.04 and 1.01.06
    None of those helped.
    Randomly the Downstream Margin goes to 2xxxxxxxxx and/or Downstream/Upstream Rates go to 0: after that the only solution is reboot or unplug and replug the phone cable.

    It would be nice to add a check: when Downstream margin goes over 10000 (let's say) or when downstream rate goes to 0, then re-training the line parameters.

    I'd do by myself, but i don't know how to modify and recompile the sources :frown: , but maybe in some future official release it can be done by Linksys itself :wink:

    Hope in a near solution of this, since this issue makes the router almost useless for some applications (VoIp or remote management, for instance)

    Bye, Mind

    PS: I'm available for some beta-testing if needed :D
     
  3. kroa

    kroa Guest

    hello,
    I have the same problem with the disconnect and no auto-reconnect.
    I have tried the 1.00.09 and 1.01.06 firmware and none of them solve this issue.
    The issue is when a have an call-phone in entrance the modem disconnect and the noise margin fall to 2xxxxxxxdB but the status led stay green .

    For me the best way is to decide to reboot automaticaly if the noise margin fall under 2 or 3dB....but i'm not able to do this (to hard for me !!)

    May be WoytekM can do it for us !

    Thanks ofr your help
     
  4. mindstorm

    mindstorm LI Guru Member

    Problem solved !!!
    I sent back the router to my ISP and they sent me another router (of **another** brand).
    Works like a charm now. :halo:

    I think it's the only choice for those who have disconnections problems :mad:

    Bye, Mind
     
  5. ksharp22

    ksharp22 Addicted to LI Member

    So?

    So.... :redface::redface:

    Whats the best solution? :S

    What to do. :|

    I actually bought this router some days ago, thought it would be nice, my friend recommended it. :(

    Please reply ASAP. :rolleyes::rolleyes:
     
  6. Mothersh1p

    Mothersh1p Addicted to LI Member

    If you want to download a lot and like a speedy experience I recommend you forthnet and my firmware. I'm not too sure about forthnet, because I haven't tried it now (I have a WRTGL54 now). If you want more features and a lot of support (woytek seems to be a nice guy) then try woytekm OpenWag. Anyway all of them are FREE(!), you can even get the sourcecode and start your own experiment. So, there is not too much risk :hearts:
     
  7. ksharp22

    ksharp22 Addicted to LI Member

    Thanks for the comment, i will try now latest firmware of woytek. :)

    Thanks!

    Will tell you about it if it works or not. :)
     
  8. nefiilim

    nefiilim Addicted to LI Member


    Your problem has been solved by a new firmware from woytek or not??
     
  9. bovirus

    bovirus LI Guru Member

    Please sue the atest official 1.01.09 that include all fw by forthnet.
     
  10. Radio-tech

    Radio-tech LI Guru Member

    I'm wit B internet and I get disconnected essentially, even though the internet light and DSL light are green, I call it no through put I have tried all the firmware’s 1.00.09 and 1.01.06 also the latest from woytek, incidentally I have 2 of these routers to eliminate a fault they both do it, the problem also seems worse when there is no activity and I come back to the computer, but it has stopped a few times when I have been using the internet.
    Any ideas, would really be appreciated
     
  11. Mothersh1p

    Mothersh1p Addicted to LI Member

  12. Radio-tech

    Radio-tech LI Guru Member

    Hi I will give it a go, but have you done any changes to the WAN side which may help disconnections, I do like the up time in the woytek I don’t know why the original Linksys firmware never had this.
     
  13. Mothersh1p

    Mothersh1p Addicted to LI Member

    Woytek sucks!
     
  14. Radio-tech

    Radio-tech LI Guru Member

    I flashed your firmware but I'm afraid it did not solve my problem but it was worth a go, thanks for your help
     
  15. bovirus

    bovirus LI Guru Member

    @Mothersh1p
    Your firmware is based on 1.01.06 official that doesn't have all fixes intriduced with 1.01.09.

    This is the mod fw (based on official Linksys 1.01.09) with telnet active by default (without debug link)

    WAG200G - Firmware mod 1.01.09 telnet active
     
  16. Mothersh1p

    Mothersh1p Addicted to LI Member

    Could you do a diff on 1.01.09 so that I can see what they have modified?
     
  17. bovirus

    bovirus LI Guru Member

    You can see the changes directly on Linksys web site.
    New ADSL DSP and improvemnts about poor ADSL line (for Italy & Greece)
     
  18. Jorge_O

    Jorge_O Addicted to LI Member

    bovirus

    I've Dl'd your link and the changelog only refers to the standard 1.01.09 version.
    I already use this version and my WAG200G (ADSL2+) freezes frequently.

    Does the FW in your link address this problem?

    Thanks,
     
  19. Mothersh1p

    Mothersh1p Addicted to LI Member

    Try my version of the WAG200G. Perhaps it could help you!
     
  20. bovirus

    bovirus LI Guru Member

    @Mothersh1p
    Please always refer that your fw is based on 1.01.06 base and doesn't have all changes about 1.01.09

    @Radio-Tech
    I'm using the 1.01.09 telent mod for a long without freezing.
    I had this problem with Linksys WAg54GS. The problem was the power supply. I replaced it (12V 1A) with the power supply of a scanner (12V 1.2A) e the problem disappera.

    Also now it's available the Openwag200 0.10 firmware (based on 1.01.09)

    Home: http://openwag200.org/
    Download: http://sourceforge.net/projects/openwag200/files/
    Changelog: http://openwag200.org/?p=releases
     

Share This Page