1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG200G PPPoE Problem

Discussion in 'Other Linksys Equipment' started by HuzursuZ, May 14, 2007.

  1. HuzursuZ

    HuzursuZ LI Guru Member

    Hi all,

    I am using firmware 1.01.04, and also I have Huawei ADSL modem, with Huawei I can go online without any problems... I checked every setting and everything seems correct...

    I searched and looked so many pages but couldn't find any answer about this, maybe you can help... Thanks...

    here is the log of my connection...

     
  2. HuzursuZ

    HuzursuZ LI Guru Member

    hi I'm still stuck on that...

    so can anybody tell me how to sniff this wag200g modems connection protocol, I can sniff my other modem with WireShark, I can see PPP packets so if I can see them with wag200g maybe I can solve my problem...

    should I try an alternative 3rd party firmware ?
     
  3. mstombs

    mstombs Network Guru Member

    judging by the log the first thing you should try is to reduce the MTU/MRU to a conservative 1400, and tick "enforce MRU" if available.
     
  4. ReDFlaG

    ReDFlaG Network Guru Member

  5. HuzursuZ

    HuzursuZ LI Guru Member

    thanks... I will try them and post result here...
     
  6. HuzursuZ

    HuzursuZ LI Guru Member

    Hi all...

    I solved my problem and writing here to anyone else who can have same...

    I disabled "Connect on Demand" and enabled "Keep Alive"... and now everything works fine...

    Thanks everyone... I hope this can help someone...
     

Share This Page