1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG200G problem

Discussion in 'Other Linksys Equipment' started by pecet1, Aug 10, 2008.

  1. pecet1

    pecet1 Guest

    Hi, everything worked fine, for few months, but recently my WAG200G started to crash, after some time (it can be few hours or few days) power and DSL diode are turned on (both yellow not red), however Internet and WiFi diode are turning off.

    Sorry for my bad english, and thanks in advance.

    edit: of course i'm using most recent official firmware
     
  2. ReDFlaG

    ReDFlaG Network Guru Member

    are you sure you do not have issue with your ISP or your dsl line?
    Can't you test your WAG on another line (ask a friend) ?

    if dsl and isp are ok and it fails on another line, try a factory reset then reload the latest firmware and redo your settings. if that fails you should consider a RMA
     
  3. Miaco

    Miaco Guest

    Having the same problem

    Hi,

    I've got what sounds like the same issue. All lights are green (yellow?) but all of a sudden the LAN and internet connection stop working. I've spoken to my ISP a number fo times, and they say I'm still connected when this occurs. After some ping tests, it seems the problem is related to DNS. I can ping and get replies from IP address, but if I ping, say www.google.com I get nothing.
    Does anyone have any ideas?
    If I restart my modem I will be connected for a couple of minutes, then it'll just stop working. Please god, don't make me buy a new router.
     
  4. przem00

    przem00 Addicted to LI Member

    Which version of the software ? If older than 1.01.08, please upgrade to this one.
    Find more information in other topic.
     
  5. sceng_me

    sceng_me Addicted to LI Member

    this version for new not problem?
     
  6. bovirus

    bovirus LI Guru Member

    Also did you already check the power unit?
    Many times I found that the problem was it. Try with other one with same voltage but more current.
    When you say "latest recent firmware" you don't say nothing. Please post your firmware version. The latest one it's 1.01.09 (available also with telnet always active).
     

Share This Page