1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG200G Router problem,PLEASE HELP

Discussion in 'General Discussion' started by fahad28, Oct 2, 2008.

  1. fahad28

    fahad28 Guest

    My uncle next building has a WAG200G wireless router and speed u to 1mb but when i connect to his router my downloading speed is only 8-9 kbs.Why don't i get the same speed as his.Im using D-Link WAG 510 Network Adapter.
    My network signal is 60% but the speed is not good.Please help.

    Here is the Status.
    ...................................................
    DSL Connection
    DSL Status: Connected
    DSL Modulation Mode: MultiMode
    DSL Path Mode: Interleaved
    Downstream Rate: 1184 kbps
    Upstream Rate: 192 kbps
    Downstream Margin: 19 db
    Upstream Margin: 6 db
    Downstream Line Attenuation: 23 db
    Upstream Line Attenuation: 7.5 db
    Downstream Transmit Power: 10 db
    Upstream Transmit Power: 6 db

    PVC Connection
    Encapsulation: RFC 2516 PPPoE
    Multiplexing: LLC
    Qos: UBR
    Pcr Rate: 0
    Scr Rate: 0
    Autodetect: Enable
    VPI: 0
    VCI: 33
    Enable: Yes
    PVC Status: Up
    ................................

    Could you give be the best router settings,maybe there is a problem in the settings.
    PLEASE HELP.
    Thankyou in advance.
     

Share This Page