WAG200G v1.0 & mod firmware

Discussion in 'Other Firmware Projects' started by filloweb, Apr 10, 2009.

  1. filloweb

    filloweb Guest

    Hi all.

    I've found your forum and I'm soo interested about a cross flash for my WAG200G.

    What kind of firmware are flashable on this hardware ?
    For example, for Woytek, how can I do that?
    Only download the img and flash from web interface ?!?!

    Thanks a lot.
  2. szubster

    szubster Addicted to LI Member

    Yes. It's so simple with WotekM's firmware.
  3. jedpod

    jedpod Guest

    I'd like to try Woytek firmware for annex B

    Does anyone used it?

    I don't like to be beta tester and generate problems for my working WAG200G.
    Even Woytek inform that annex B firmware is not tested.
  4. szubster

    szubster Addicted to LI Member

    Annex A firmware does perfect job. I cant test Annex B beacouse of my ISP.
    Try it yourself. If it won't work you can always flash back again official firmware.
  5. RedRooster

    RedRooster Reformed Router Member

    Can we still download OpenWAG200 somewhere nowadays ?
    Unfortunately I only bump into no more existing, or broken, links....
  6. Divakaran

    Divakaran Network Newbie Member

    Hi - can any one help me sharing the url to download the WotekM's firmware build 0.8 anex A or B. please help. this is pretty urgent and critical for me please.
  7. mstombs

    mstombs Network Guru Member

  8. Divakaran

    Divakaran Network Newbie Member

    hi - thanks for your information. I am trying to enable the wireless client mode in my wag200g to connect this router to another route by wifi mode. I am not sure this openwag has that option. please help how to enable the wireless client mode in my wag200g or x2000 linksys modem. please help and provide the firmware that i need to upgrade to. thanks in advance.
  9. mstombs

    mstombs Network Guru Member

    Sorry, I don't think the Ti AR7 wireless drivers support such an option, in fact the ADSL routers are difficult to get to work with anything other than the DSL port as the wan port, I do know some firmwares (not open source) did enable a pppoe connection via an ethernet port, and some were able to get WDS working between similar devices. I think you should be looking at new hardware, I have an tiny portable LM router and a Fonera (with dd-wrt) which do have wireless client mode, and useful for getting wireless internet into an Ethernet cable for a laptop...
  10. Divakaran

    Divakaran Network Newbie Member

    Hi - thanks for your response. I read in the forum that woytem build 0.8 will support wireless client mode for wag200g. So can u please share me the link for the same firmware and let me try out. thanks in advance
  11. Divakaran

    Divakaran Network Newbie Member

    please note that I am only trying to expand the wireless lan with my other wirelss lan router. not to connect as adsl client.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice