1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WAG354G and Internet led

Discussion in 'Other Linksys Equipment' started by capthookb, Jun 21, 2006.

  1. capthookb

    capthookb Network Guru Member

    The router was working normally, but the speed was very slow for about a few minutes. An hour ago it was downloading as always at full speed.
    Then i decided to give it a restart. Since then i don't have internet. The internet led doesn't go green or red or anything. It is always turned off.
    I also has attached a serial console to the router, and i don't see much information about the problem. If i set vc settings in autodetect it is failing any combination of vci and vpi. (my isp settings are 8.35)
    What can i do?
    Code:
    .............list  ..............
    info, udhcp server (v0.9.8) started
    killall: snmpd: no process killed
    done
    log_ipaddr=255
    killall: leijun--upnpd-igd ver 0.83 2004-0329: no process killed
    Now Start syslog.........................!!zebra disabled
    killall: adslpolling: no process killed
    IDLE
    Hit enter to continue...wan def hwaddr 00:14:BF:99:A7:30
    polling now .......
    upnpd-igd:current select wan connection:0
    upnp_content_num_0 = 14
    killall: begin_now: no process killed
    polling end .......
    signalling TIMER
    -------now will start wan connection 0-------
    waiting last conn to finish.............
    waiting done.............
    nonauto!!!
    random time 5
    here is nodemand mode
    enter redial
    enter start_redial 20  ppp0
    killall: wanledctrl: no process killed
    --------which conn 0
    Plugin pppoa loaded.
    PPPoA Plugin Initialized
    Plugin pppoa called.
    PPPoATM setdevname_pppoatm - SUCCESS
    PPPoATM setdevname_pppoatm - SUCCESS
    Options file - /tmp/etc/ppp/options.8.35.
    setting line discipline hook
    connect_pppoatm_ses...Enter
    connect_pppoatm_ses: socket created fd - 0x6.
    connect_pppoatm_ses: setsockopt called.
    connect_pppoatm_ses: connect successful.
    Calling line discipline hook
    Setting pppoatm line discipline.
    vc encaps.
    ppp_dev_fd 4
    x == 0
    Using interface ppp0
    Connect: ppp0 <--> 
    Why comes here???
    ok------redial_action start!
    ppp_pid[0], 56
    
    Terminating on signal 15.
    here is nodemand mode
    Plugin pppoa loaded.
    PPPoA Plugin Initialized
    Plugin pppoa called.
    PPPoATM setdevname_pppoatm - SUCCESS
    PPPoATM setdevname_pppoatm - SUCCESS
    Options file - /tmp/etc/ppp/options.8.35.
    setting line discipline hook
    connect_pppoatm_ses...Enter
    connect_pppoatm_ses: socket created fd - 0x6.
    connect_pppoatm_ses: setsockopt called.
    connect_pppoatm_ses: connect successful.
    Calling line discipline hook
    Setting pppoatm line discipline.
    vc encaps.
    ppp_dev_fd 4
    x == 0
    Using interface ppp0
    Connect: ppp0 <--> 
    
     
  2. djjeffrey

    djjeffrey LI Guru Member

    I guess your ISP changed IP addresses but they will give you notice before they will do something like that.

    Call your ISP for a dsl line checkup, using a other dsl modem to see if your linksys modem is dead...
     
  3. capthookb

    capthookb Network Guru Member

    Thank you for your reply.

    Today the router all of a sudden connected again with the ISP.
    I guess there was a problem in their side but they wouldn't admit it, or know that they had it.
    Anyway, it is working again. Probablay not a router problem.
     
  4. MajorFU

    MajorFU LI Guru Member

    sounds like your ISP had a problem with their DHCP if you are on dynamic IP or maybe their raduis server was having problems
     
  5. MajorFU

    MajorFU LI Guru Member

    sounds like your ISP had a problem with their DHCP if you are on dynamic IP or maybe their raduis server was having problems
     

Share This Page