1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wag354g help firmware

Discussion in 'Other Linksys Equipment' started by bogdansik, Jan 29, 2007.

  1. bogdansik

    bogdansik LI Guru Member

    What is the difference between WAG354d Annex A and Annex B. Is that firmware only? Or is there something else?

    greetings from poland
     
  2. Advis

    Advis Network Guru Member

    Greetings and welcome to the forum.

    I believe Annex A is for regular copper wire telephone systems, Annex B for IDSN telephone systems. So it's more than just firmware as neither are interchangable. I don't know what you would need in Poland but I'd guess Annex A.
     
  3. bogdansik

    bogdansik LI Guru Member

    aha ok

    wag354g eu annex A hardware data 11/2005
    firmware 1.01.03

    hardware version v1 ,v2 ?????????????
     
  4. Advis

    Advis Network Guru Member

    V1..
     
  5. bogdansik

    bogdansik LI Guru Member

    Thanks a lot for help Advis.
    I've got one more question - if hidden function dhcp_reserved.asp is available in firmware 1.01.11 or it will be available in next version only?
     
  6. Advis

    Advis Network Guru Member

    No problem at all. dhcp_reserved.asp is accessible in 1.01.11 but as far as I can tell it doesn't actually work. If you want to configure a static IP do it through Windows network settings as if you were assigning an IP manually.
     
  7. bogdansik

    bogdansik LI Guru Member

    yes, i know that - but I need function which gives permanent address for wifi-clients. Then - I'll avoid changing ip (ex from somebody who wants obviate restrictions).
     
  8. acmorfe

    acmorfe Network Guru Member

    where can i get the latest f/w for the v1?
    thanks.
     
  9. Advis

    Advis Network Guru Member

    You can find the latest WAG354G firmware on www-uk.Linksys.com.
     

Share This Page